Carburetor Removal And Installation - Eton VECTOR ST 250 Service Manual

5-4 Carburetor Remove / Install
Removal
Drain out fuel in the float chamber.
Drain bolt
Loosen the choke cable fixed iron sheet screw
1 screw
from plate.
Remove the choke cable.
Choke cable
Vacuum pipe
Fuel pipe
Disconnect the fuel hose.
Release the clamp strip of air cleaner.
Clamp
Remove the carburetor upper parts from the
carburetor.
Release the 2 nuts of carburetor insulator, and
then remove the carburetor.
Installation
Install in reverse order of removal procedures.
2 nuts
26