Distorting An Overlay Clip; Applying Motion To The Overlay Clip - Ulead VIDEOSTUDIO 11 User Manual

82
ULEAD VIDEOSTUDIO USER GUIDE
It is recommended that you keep the Overlay clip within the title safe area.
The Keep Aspect Ratio in Options resizes the Overlay clip based on the width or
height, depending on which is longer in length, of the Overlay clip.
Note: When you resize or distort the Overlay clip then go back to the Edit tab, the clip will
appear to have resized back to its original size. This is only for editing purposes, the
Overlay clip retains its properties.

Distorting an Overlay clip

Each corner of the marquee of the Overlay clip have green nodes which you can
use to distort the Overlay clip. Drag the green nodes to distort the Overlay clip.
Tip: Hold [Shift] while dragging the green nodes to keep the distortion within the current
clips's marquee.

Applying motion to the Overlay clip

After clicking the Attribute tab, select where the Overlay clip will Enter and Exit
the screen under Direction/Style. Click a specific arrow as to where you want
your clip to enter and exit in your movie.
longer side