Ulead VIDEOSTUDIO 11 User Manual page 59

5. Drag the Jog Slider again, this time, to the point where you want the segment
to end. Click
6. Do steps 4 and 5 repeatedly until you have marked all the segments you want
kept or removed.
Tips:
• To mark segments, you can also press [F3] and [F4] while playing the video.
• Click Invert Selection
to retain or marking segments that you want taken out from the clip.
• Quick search interval allows you to set a fixed interval between frames and
browse through the movie using the set value.
7. Click OK when finished. The video segments that you kept are then inserted
onto the Timeline.
Navigation controls in the Multi-trim Video dialog box:
[F5] [F6]
Using Ad-Zapper
VideoStudio lets you search your videos for commercial intervals. Clicking this
feature extracts the commercials to the media list.
• Detection sensitivity allows you to control the rate of distinguishing
between commercials.
• Merge CF merges all your extracted clips that are identified as commercials.
End.
to toggle between marking segments that you want
Reverses or advances through the video in fixed increments. By
default, these buttons move up or down through the video in
increments of 25 seconds.
Plays a preview of the final trimmed video.
Plays the video file. Hold [Shift] then click to play only the selected
segments.
Moves to the start or end frame of a trimmed segment.
Moves to the previous/next frame in the video.
ULEAD VIDEOSTUDIO USER GUIDE
59