Trimming A Clip - Ulead PYRO1394DV User Manual

Capturing video to your computer with frame by frame accuracy is not easy. Fortunately,
precise editing is really not a problem with Video Wizard.

Trimming a clip

1. Select a clip and click the Trim button.
2. In the Trim Video dialog box, slide the Handle to the right until you see the exact point
that you want to use as the starting point of the clip.
3. Click the Start Trim button to mark it as the first frame of the trimmed clip.
4. Slide the Handle further to the right until you find the point where you want the clip to
end.
5. Click the Stop Trim button to mark it as the last frame of the trimmed clip.
6. Click the Play trimmed clip button to see your edits.
7. Click the Return button to go back to Video Wizard.
Trim handle
Click and drag
to trim a clip.
R e t u r n
Click to return to the main
Video Wizard interface.
Note: There are other helpful buttons in the Trim Video dialog box that you can
use to scroll through the frames of a clip. Watch the Status bar at the bottom of
the window for information about the Mark in and Mark out points, which you
can use for more accurate trimming.
The Trim Video dialog box.
Play trimmed clip
Plays the trimmed
portion of your clip.
13