Step 2: Select A Template - Ulead VIDEOSTUDIO 11 User Manual

Click to automatically split video clips into smaller clips based on their
shooting date and time.
You can also click
name or date.
To capture video and images:
1. Connect your camcorder to your computer and turn on the device. Set it to Play
(or VTR / VCR) mode.
2. In VideoStudio Movie Wizard, click Capture.
3. Check if your camcorder is selected in the Source list.
4. Select the video file format to use for saving captured video files from the
Format list. Specify the Capture folder in which to save the files.
5. Choose Split by Scene to separate scenes in your DV video clip into several
clips based on frame content or shooting date and time.
Note: Click Options to customize capture settings specific to your video device.
6. Play the videotape in your camcorder, and position the tape on the part of the
video where to start capturing.
Tip: If you are capturing video from a DV or HDV camcorder, use the Navigation Panel
to play your videotape.
7. Click Capture Video to start capturing. Click Stop Capture or press [Esc] to
stop capturing.
8. To capture a still image from the video footage, pause the video on the desired
image then click Capture Image.
9. Click Enable/Disable Audio Preview to play or stop DV audio preview while
capturing.

Step 2: Select a template

Select a movie template to apply to your project. Each template provides a
different theme which comes with preset start and ending video clips, transitions,
title and background music.
to sort clips in the Media Clip List according to their
ULEAD VIDEOSTUDIO USER GUIDE
25