Ulead VIDEOSTUDIO 11 User Manual page 31

The Navigation Panel
The Navigation Panel is used to preview and edit the clips used in your project.
Use the Navigation Controls to move around a selected clip or your project. Use
the Trim Handles and Jog Slider to edit your clips.
When capturing video from a DV or HDV camcorder, the Navigation Controls are
used for device control. Use these buttons to control your DV or HDV camcorder or
any other DV device.
1
1 Play Mode
Select whether you want to preview
your project or only the selected clip.
3 Home
Returns to the starting frame.
5 Next
Moves to the next frame.
7 Repeat
Loops playback.
9 Timecode
Allows you to directly jump to a part of
your project or selected clip by
specifying the exact timecode.
11 Mark-in/out
Use these buttons to set a preview range
in the project, or to mark the start and
end points where to trim a clip.
13 Enlarge Preview Window
Click to increase the size of the Preview
Window. You can only preview, not edit,
your clips when the Preview Window is
enlarged.
10
2 3 8
4 5 6 7
2 Play
Plays, pauses or resumes the current
project or a selected clip.
4 Previous
Moves to the previous frame.
6 End
Moves to the end frame.
8 System Volume
Click and drag the slider to adjust the
volume of your computer's speakers.
10 Jog Slider
Allows you to scrub through the project or
clip.
12 Cut Clip
Cuts the selected clip into two. Position the
Jog Slider to where you want the first clip
to end and the second one to start, then
click this button.
14 Trim Handles
Allows you to set a preview range in the
project or trim a clip.
ULEAD VIDEOSTUDIO USER GUIDE
11 12 13
14
9
31