Dodge 2010 Ram Truck Chassis Owner's Manual page 89

Cancel Command
At any prompt, after the beep, you can say Cancel and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) uconnect™ phone to a Cellular Phone
To begin using your uconnect™ phone, you must pair
your compatible Bluetooth enabled cellular phone.
To complete the pairing process, you will need to reference
your cellular phone Owner's Manual. The uconnect™
website may also provide detailed instructions for pairing.
The following are general phone to uconnect™ phone
pairing instructions:
• Press the
button to begin.
• After the Ready prompt and the following beep, say
Setup Phone Pairing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87
• When prompted, after the beep, say Pair a Phone and
follow the audible prompts.
• You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
• For identification purposes, you will be prompted to
give the uconnect™ phone a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between one and seven, with one being
the highest priority. You can pair up to seven cellular
phones to your uconnect™ phone. However, at any
given time, only one cellular phone can be in use,
connected to your uconnect™ phone. The priority
allows the uconnect™ phone to know which cellular
3