Jacking And Tire Changing; 3500 Models - If Equipped - Dodge 2010 Ram Truck Chassis Owner's Manual

Dodge 2010 ram chassis cab owner's manual
Hide thumbs Also See for 2010 Ram Truck Chassis:
Table of Contents

Advertisement

JACKING AND TIRE CHANGING

WARNING!
• Being under a jacked-up vehicle is dangerous. The
vehicle could slip off the jack and fall on you. You
could be crushed. Never put any part of your body
under a vehicle that is on a jack. Never start or run
the engine while the vehicle is on a jack. If you
need to get under a raised vehicle, take it to a
service center where it can be raised on a lift.
• The jack is designed to use as a tool for changing
tires only. The jack should not be used to lift the
vehicle for service purposes. The vehicle should
be jacked on a firm level surface only. Avoid ice or
slippery areas.
WHAT TO DO IN EMERGENCIES 297
3500 Models — If Equipped
The jack and jack tools are stored under the front
passenger seat. Lift the flap on the side of the seat for
access.
Remove the jack and tools by removing the wing bolt and
sliding the assembly from under the seat.
Jack Location
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ram truck 2010

Table of Contents