Clock Setting Procedure; Sales Code Ref - Am/Fm/Cd (Single-Disc); Radio With Optional Uconnect™ Studios; (Satellite Radio) And Uconnect™ Phone - Dodge 2010 Ram Truck Chassis Owner's Manual

178 UNDERSTANDING YOUR INSTRUMENT PANEL
When the ignition switch is in the OFF position, or when
the radio frequency is being displayed, time keeping is
accurately maintained.
On the RAQ radio the time button alternates the location
of the time and frequency on the display. On the REF only
one of the two, time or frequency, is displayed at a time.

Clock Setting Procedure

1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune/
Audio control.
3. After the hours are adjusted, press the right side
Tune/Audio control to set the minutes.
4. Adjust the minutes using the right side Tune/Audio
control.
5. To exit, press any button/knob or wait approximately
five seconds.
SALES CODE REF — AM/FM/CD (SINGLE-DISC)
RADIO WITH OPTIONAL uconnect™ studios
(SATELLITE RADIO) AND uconnect™ phone

CAPABILITY

NOTE: The radio sales code is located on the lower right
side of your radio faceplate.
REF Radio