Jacking Instructions - Dodge 2010 Ram Truck Chassis Owner's Manual

Dodge 2010 ram chassis cab owner's manual
Hide thumbs Also See for 2010 Ram Truck Chassis:
Table of Contents

Advertisement

6. Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if the right front
wheel is being changed, block the left
rear wheel.
NOTE: Passengers should not remain in the vehicle
when the vehicle is being jacked.

Jacking Instructions

Instructions
WARNING!
Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
• Always park on a firm, level surface as far from
the edge of the roadway as possible before raising
the vehicle.
• Block the wheel diagonally opposite the wheel to
be raised.
• Set the parking brake firmly and set an automatic
transmission in PARK; a manual transmission in
REVERSE.
• Never start or run the engine with the vehicle on a
jack.
• Do not let anyone sit in the vehicle when it is on a
jack.
• Do not get under the vehicle when it is on a jack.
• Only use the jack in the positions indicated and
for lifting this vehicle during a tire change.
(Continued)
WHAT TO DO IN EMERGENCIES 299
WARNING! (Continued)
6
(Continued)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ram truck 2010

Table of Contents