Electronic Speed Control - If Equipped; To Activate; To Set A Desired Speed - Dodge 2010 Ram Truck Chassis Owner's Manual

134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
ELECTRONIC SPEED CONTROL — IF EQUIPPED
When engaged, Electronic Speed Control takes over accel-
erator operation at speeds greater than 25 mph (40 km/h).
The controls are mounted on the steering wheel.
Electronic Speed Control Buttons
1 — Resume
2 — Cancel
3 — Decel
4 — Set
5 — On/Off
NOTE: In order to ensure proper operation, the Elec-
tronic Speed Control System has been designed to shut
down if multiple Speed Control functions are operated
simultaneously. If this occurs, the Electronic Speed Con-
trol System can be reactivated by pushing the Electronic
Speed Control ON/OFF button and resetting the desired
vehicle set speed.

To Activate

Push the ON/OFF button to the ON position. An indi-
cator light in the instrument cluster illuminates when the
system is on.

To Set a Desired Speed

When the vehicle has reached the desired speed, press
and release the SET button. Release the accelerator and
the vehicle will operate at the selected speed.