Page 1 Journey 2 0 1 0 O W N E R ’ S M A N U A L...
Page 2: Introduction
TABLE OF CONTENTS SECTION ............3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 4: Table Of Contents
CONTENTS Introduction ......4 How To Use This Manual ....4 Warnings And Cautions .
Page 5: Introduction
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle.
Page 6 INTRODUCTION 5...
Page 7: Vehicle Identification Number
This VIN Location number also appears on the Automobile Information NOTE: It is illegal to remove or alter the VIN. Disclosure Label affixed to a window on your vehicle, the...
Page 8: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Wireless Ignition Node (WIN) ... . 12 Key FOB .
Page 11 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm ....23 Remote Open Window Featuree ... 23 Programming Additional Transmitters .
Page 12 Seat Belts And Pregnant Women ..53 Seat Belt Extender ..... 53 Supplemental Restraint System (SRS) —...
Page 13: Things To Know Before Starting Your Vehicle 9
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch.
Page 14: Key Fob
Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead.
Page 15: Tip Start Feature
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Tip Start Feature Do not press the accelerator. Use the Key Fob to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running.
Page 16: Key-In-Ignition Reminder
CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder Opening the driver’s door when the Key Fob is in the ignition and the ignition switch position is LOCK or ACC, a chime will sound to remind you to remove the key.
Page 17: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer.
Page 18: Customer Key Programming
Customer Key Programming Programming Key Fobs or RKE transmitters may be performed at an authorized dealer. General Information The Sentry Key system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: •...
Page 19: To Disarm The System
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Close all doors. The Vehicle Security Light in the instrument cluster will flash to signal that the system is arming. During this period, opening any door or the liftgate will cancel the arming process. NOTE: For added security, whenever the Security Alarm is armed, the HomeLink /Garage Door Opener...
Page 20: Remote Keyless Entry (Rke)
This feature also turns on the approach lighting (if equipped). Refer to “Electronic Vehicle Information Cen- ter (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. The interior lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switch is turned ON.
Page 21: To Unlock The Doors And Liftgate
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock the Doors and Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal.
Page 22 Flash Lights with Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- ter. This feature can be turned on or turned off. To change the current setting, proceed as follows: •...
Page 23: To Lock The Doors And Liftgate
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Information Center (EVIC)/Personal Settings (Customer- Programmable Features)” in “Understanding Your In- strument Panel” for further information. To Lock the Doors and Liftgate Press and release the LOCK button on the RKE transmit- ter to lock all doors and liftgate.
Page 24: Using The Panic Alarm
Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. Using the Panic Alarm To turn the Panic Alarm feature ON or OFF, press and hold the PANIC button on the RKE transmitter for at least one second and release.
Page 25: Transmitter Battery Replacement
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Replacement The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board.
Page 26: General Information
3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. •...
Page 27 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Hood closed • Liftgate closed • HAZARD switch off • BRAKE switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level, and •...
Page 28 • For security, power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter. However, the ignition switch must be cycled to the ON position before you can repeat the start sequence for a third cycle.
Page 29: Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Manual Door Locks To lock each door, push the door lock plunger on each door trim panel downward. To unlock the front doors, pull the inside door handle to the first detent. To unlock the rear doors, pull the door lock plunger on the door trim panel upward.
Page 30: Power Door Locks
WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle. Unsuper- vised use of vehicle equipment may cause severe personal injuries and death.
Page 31 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To prevent you from locking your Key Fob in the vehicle, the power door lock switch will not operate when the Key Fob is in the ignition and either front door is open. A chime will sound as a reminder to remove the Key Fob.
Page 32 5. The doors were not previously unlocked 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)”...
Page 33: Child Protection Door Lock System (Rear Doors)
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Protection Door Lock System (Rear Doors) To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a Child Protection Door Lock system. To Engage the Child Protection Door Lock System 1.
Page 34 WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Failure to follow this warning may result in serious injury or death. NOTE: •...
Page 35: Windows
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Repeat Steps 1 and 2 for the opposite rear door. NOTE: After disengaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window controls on the driver’s door trim panel...
Page 36 NOTE: • For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Open- ing either front door will cancel this feature. •...
Page 37 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Up Feature with Anti-Pinch Protection — If Equipped On some models, the driver’s and front passenger’s power window switch has an Auto-up feature. Pull the window switch up to the second detent, release, and the window will go up automatically.
Page 38: Wind Buffeting
position). To enable the window controls, press and release the window lockout button again (setting it in the up position). Window Lockout Switch THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Reset It may be necessary at some point in time to reactivate the Auto-up/Auto-down feature.
Page 39: Liftgate
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the rear windows open, then open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sun- roof opening to minimize the buffeting or open any window.
Page 40: Occupant Restraints
WARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. These fumes could injure you and your passengers. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the blower switch on the climate control is set at high speed.
Page 41 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • All seat belt systems (except the driver’s) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat —...
Page 42: Lap/Shoulder Belts
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
Page 43 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too.
Page 44 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Connecting Latch Plate To Buckle THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly.
Page 45 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries.
Page 46 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug.
Page 47: Lap/Shoulder Belt Untwisting Procedure
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE depress the button above the webbing to release the anchorage, then move it up or down to the position that fits you best. Adjusting Upper Shoulder Belt As a guide, if you are shorter than average you will prefer a lower position and if you are taller than average you will prefer a higher position.
Page 48: Automatic Locking Retractors (Alr) Mode - If Equipped
4. Continue to slide the latch plate up until it clears the folded webbing. Automatic Locking Retractors (ALR) Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked. The belt will still retract to remove any slack in the shoulder belt.
Page 49: Supplemental Active Head Restraints (Ahr)
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt still must be worn snugly and positioned properly. The pretensioners are triggered by the Occupant Re- straint Controller (ORC).
Page 50 Active Head Restraint (AHR) Components 3 — Head Restraint Back Half 1 — Head Restraint Front Half (Decorative Plastic Rear (Soft Foam and Trim) Cover) 4 — Head Restraint Guide 2 — Seatback Tubes THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head...
Page 51 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. Hand Positioning Points On AHR 2. Position the hands on the top of the deployed AHR at a comfortable position. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism.
Page 52 3 — Final Downward Movement To Engage Locking Mecha- nism 4. The AHR front soft foam and trim half should lock into the back decorative plastic half. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 AHR In Reset Position NOTE: •...
Page 53: Enhanced Seat Belt Use Reminder System (Beltalert )
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert ) If the driver’s or front passenger’s (if equipped with belt alert) seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced Warning System (BeltAlert ) will alert the driver or front passenger to buckle the seat belt.
Page 54: Seat Belts And Pregnant Women
2. Turn the ignition switch to the ON position, (do not start the engine). Wait for the Seat Belt Reminder Light to turn off and then proceed to the next step. 3. Unbuckle the driver’s seat belt, allow the seat belt to retract, and then re-buckle the driver’s seat belt at least three times, ending with the seat belt buckled.
Page 55: Supplemental Restraint System (Srs) - Airbags
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE extender should be used only if the existing belt is not long enough. When it is not required, remove the ex- tender and store it. WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision.
Page 56 The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have different rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat position.
Page 57: Advanced Front Airbag Features
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Instrument Panel • Knee Impact Bolster • Driver Advanced Front Airbag • Passenger Advanced Front Airbag • Supplemental Seat-Mounted Side Airbags (SAB) • Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors •...
Page 58 WARNING! (Continued) • Do not put anything on or around the airbag covers or attempt to open them manually. You may damage the airbags and you could be injured because the airbags may no longer be functional. The protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing.
Page 59 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE deploys independently, that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag. Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags may offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure.
Page 60 The system includes side impact sensors adjacent to both front and rear seat occupants that are calibrated to deploy the SABIC airbags during impacts that require airbag occupant protection. WARNING! • If your vehicle is equipped with left and right Supplemental Side Airbag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC.
Page 61 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause severe injury or death to infants in that posi- tion.
Page 62: Airbag Deployment Sensors And Controls
If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under If You Need Assistance . WARNING! • Relying on the airbags alone could lead to more severe injuries in a collision.
Page 63 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ORC deploys the Advanced Front Airbags, SABIC air- bags — if equipped, Supplemental Seat-Mounted Side Airbags — if equipped, and front seat belt pretensioners — if equipped, as required, depending on the severity and type of impact.
Page 64 in the ACC position, or not in the ignition, the airbag system is not on and the airbags will not inflate. The ORC contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment.
Page 65 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes.
Page 66 deploy the SABIC airbags, depending on the severity and type of collision. In these events, the ORC will deploy the SABIC only on the impact side of the vehicle. A quantity of non-toxic gas is generated to inflate the side curtain airbag.
Page 67 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlock the doors automatically. If a Deployment Occurs The front airbags are designed to deflate immediately after deployment.
Page 68 Do not drive your vehicle after the airbags have de- ployed. If you are involved in another collision, the airbags will not be in place to protect you. WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front passenger seat belt retractor assembly replaced by an authorized dealer as soon as possible.
Page 69 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. Take your vehicle to an autho- rized dealer for any advanced airbag system ser- vice.
Page 70: Event Data Recorder (Edr)
check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good. Event Data Recorder (EDR) In the event of a collision, your vehicle is designed to record up to five seconds of specific vehicle data param- eters (see list below) in an event data recorder prior to the moment of airbag deployment, or near deployment (if...
Page 71 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the event that an investigation is undertaken by Chrysler Group LLC (regardless of initiative), the com- pany or its designated representative will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic data stored, unless ordered to image the data by a court with legal jurisdiction (i.e.,...
Page 72: Child Restraints
• Pedal position • And other parameters depending configuration Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it.
Page 73 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants and Child Restraints • Safety experts recommend rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing, infant carriers and convertible child seats.
Page 74 the vehicle’s seat belts properly. If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat. The child and belt- positioning booster seat are held in the vehicle by the lap/shoulder belt.
Page 75 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Lift the seat cushion up and push back to lock it in the booster seat position. Booster Seat 4. Place the child upright in the seat with their back firmly against the seatback. 5.
Page 76 8. To remove the slack from the lap belt, pull upward on the shoulder portion of the seat belt. 9. To release the seat belt, push the red button on the buckle. WARNING! Be certain that the seat cushion is locked securely into position before using the seat.
Page 77 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
Page 78 LATCH — Child Seat Anchor System (Lower Anchors and Tether for CHildren) Your vehicle’s second row passenger seats are equipped with the child restraint anchor system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchors and upper tether straps from the child restraint to the vehicle structure.
Page 79 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE All three second-row passenger seating positions have lower anchors that are capable of accommodating LATCH-compatible child seats. You should NEVER in- stall LATCH-compatible child seats so that two seats share a common lower anchorage. If installing child seats in adjacent seating positions, or if your child restraints are not LATCH-compatible, install the restraints using the vehicle’s seat belts.
Page 80 Installing the LATCH-Compatible Child Restraint System We urge you to follow the manufacturer’s directions carefully when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that are provided with the child restraint system. NOTE: When installing a child restraint, if it interferes with the Head Restraint, recline the seatback slightly to remove the interference.
Page 81 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE hook for attachment to the tether strap anchor and a means of adjusting the tension of the strap. You will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchors.
Page 82 WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. Installing Child Restraints Using the Vehicle Seat Belt The seat belts in the passenger seating positions are...
Page 83 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To attach a child restraint tether strap: • Route the tether strap to provide the most direct path for the strap between the anchor and the child seat, preferably between the head restraint posts underneath the head restraint.
Page 84: Engine Break-In Recommendations
NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
Page 85: Safety Tips
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not inter- preted as an indication of difficulty. SAFETY TIPS Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO...
Page 86: Exhaust Gas
WARNING! (Continued) • On seven passenger models, do not allow a pas- senger to sit in a third row seat with the second row seatback(s) folded flat. In a collision, the passenger could slide underneath the seat belt and be seriously or even fatally injured. Exhaust Gas WARNING! •...
Page 87: Safety Checks You Should Make Inside The Vehicle
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change.
Page 88 they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways. WARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury.
Page 89: Periodic Safety Checks You Should Make Outside The Vehicle
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) Failure to properly follow floor mat installation or mounting can cause interference with the brake pedal and accelerator pedal operation causing loss of control of the vehicle. Periodic Safety Checks You Should Make Outside the Vehicle Tires Examine tires for excessive tread wear and uneven wear...
Page 90: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......94 Inside Day/Night Mirror ....94 Automatic Dimming Mirror —...
Page 91 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seat — If Equipped ....104 Adjusting Active Head Restraints ..105 Second Row Passenger Seats .
Page 92 Battery Saver Feature ....128 Cargo Light ......128 Windshield Wipers And Washers .
Page 93 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sunroof Switch — If Equipped ..140 Garage Door Opener — If Equipped ..140 Programming HomeLink ....142 Gate Operator/Canadian Programming .
Page 94 Storage ......158 Instrument Panel Storage Compartment — If Equipped ......158 Console Storage .
Page 95: Mirrors
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 96: Automatic Dimming Mirror - If Equipped
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated.
Page 97: Outside Mirrors Folding Feature - If Equipped
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
Page 98: Heated Mirrors - If Equipped
Models without Express Window Feature Press the mirror select button marked L (left) or R (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. Models with Express Window Feature Press and release the mirror select button marked L (left) or R (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing.
Page 99: Uconnect™ Phone - If Equipped
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sun Visor “Slide-On Rod” Feature — If Equipped This feature allows for additional flexibility in position- ing the visor to block out the sun. 1. Fold down the sun visor. 2. Unclip the visor from the center clip. 3.
Page 100: Manual Front Seat Adjustments
Manual Front Seat Adjustments The manual seat adjustment bar is at the front of the seat, near the floor. Pull the bar upward to move the seat forward or rearward. Release the bar once the seat is in the position desired. Using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
Page 101: Recliner Adjustment
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recliner Adjustment The control lever is on the outboard side of the seat. To recline the seat, lean forward slightly, lift the lever, lean back to the desired position and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever.
Page 102: Lumbar Support - If Equipped
WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. •...
Page 103: Driver's Seat Height Adjustment - If Equipped
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Seat Height Adjustment — If Equipped The control lever is located on the outboard side of the seat. Raise the lever to raise the seat. Lower the lever to lower the seat. The total seat travel is approximately 2.15 in (55 mm).
Page 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Seatback Release Fold-Flat Seat Pull upward on the lever to fold or unfold the seat. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
Page 105 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seat — If Equipped The power seat switch is on the outboard side of the seat near the floor. Use this switch to move the seat up, down, forward, rearward or to tilt the seat. Power Seat Switch WARNING! Adjusting a seat while the vehicle is moving is...
Page 106: Adjusting Active Head Restraints
Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head restraint is located above the top of your ear. Adjusted Head Restraint UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 To raise the head restraint, pull upward on the head...
Page 107 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For comfort the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
Page 108 • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! • Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision.
Page 109: Second Row Passenger Seats
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Second Row Passenger Seats These head restraints non-removable. Third Row Passenger Seats — Seven Passenger Models These head restraints are non-adjustable and non- removable. However, you can fold them forward when they are not in use by passengers. Refer to “50/50 Split Third-Row Passenger Seats with Fold-Flat Feature”...
Page 110: 60/40 Split Second-Row Passenger Seats
indicator light off after an additional 30 minutes of continuous operation. If Low-level heating is selected, the system automatically turns the heater and the indi- cator light off after approximately 30 minutes of continu- ous operation. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes.
Page 111 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Prior to folding the second-row passenger seat, make sure the front seatback is not in a reclined position. This will allow the seat to fold easily. WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
Page 112 Seatback Release 2. Place one hand on the seatback and apply a gentle pressure. 3. Lift the control lever with the other hand, allow the seatback to move forward slightly, and then release the lever. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 WARNING! To prevent personal injury or damage to objects, keep your head, arms, and objects out of the folding...
Page 113 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Forward and Rearward Adjustment The control lever is on the outboard side of the seat. Lift the lever to move the seat forward or rearward. Release the lever once the seat is in the position desired. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
Page 114 Seatback Release UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked.
Page 115 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Seatback/Armrest — Second Row Passenger Seat The latch release-loop is located at the top of the seatback/armrest. Pull the release-loop upward to re- lease the latch and then downward to lower the seatback/armrest. Latch Release-Loop Raise the seatback/armrest and lock it in place when not in use or when additional seating area is required.
Page 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Move the control lever on the upper outboard side of the seatback forward, and in one fluid motion, the seat cushion flips upward and the seat moves forward on its tracks. Tip n Slide Seat™ Tip ’n Slide™...
Page 117 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: A hand-grip is molded into the front of each quarter trim panel near the door opening to assist entry and exit from the third-row passenger seats. Grab Handle WARNING! Do not drive the vehicle with the seat in this posi- tion, as it is only intended for entering and exiting the third row seats.
Page 118: 50/50 Split Third-Row Passenger Seats With Fold-Flat Feature - Seven Passenger Models
WARNING! Be certain that the seatback and seat are locked securely into position. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. 50/50 Split Third-Row Passenger Seats with Fold-Flat Feature —...
Page 119 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold the Seat Grasp the assist strap loop on the seatback and pull it toward you to raise the seatback. Continue to raise the seatback until it locks in place. Raise the head restraint to lock it in place.
Page 120: To Open And Close The Hood
WARNING! (Continued) • Do not allow a passenger to sit in a third row seat with the second row seatback(s) folded flat. In a collision, the passenger could slide underneath the seat belt and be seriously or even fatally injured. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood.
Page 121 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Outside of the vehicle, locate the safety latch lever near the center of the grille between the grille and hood opening. Push the safety latch lever to the right and then raise the hood. Underhood Safety Latch Use the hood prop rod to secure the hood in the open position.
Page 122: Lights
CAUTION! To prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center front edge of the hood to ensure that both latches engage.
Page 123: Headlights And Parking Lights
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights and Parking Lights Turn the end of the multifunction lever to the first detent for parking light operation. Turn the end of the lever to the second detent for headlight operation. Headlight Switch Automatic Headlights —...
Page 124: Headlights With Wipers (Available With Automatic Headlights Only)
Headlight Switch NOTE: The engine must be running before the head- lights will turn on in the automatic mode. Headlights with Wipers (Available with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever is placed in the AUTO position.
Page 125: Instrument Panel Dimmer
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you turn the headlights, or parking lights, or ignition switch ON again, the system will cancel the delay. If you turn the headlights off before the ignition, they will turn off in the normal manner. The headlight delay time is programmable on vehicles equipped with the EVIC.
Page 126: Daytime Running Lights - If Equipped
Daytime Running Lights — If Equipped The high beam headlights will turn on as Daytime Running Lights (DRL) and operate at DRL (lower) inten- sity, whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position except PARK.
Page 127: Turn Signals
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the front fog lights. Turn Signals Move the multifunction lever upward or downward and the corresponding turn signal indicator on the instru- ment panel will flash to show proper operation of the front and rear turn signal lights.
Page 128: Lane Change Assist
Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam.
Page 129: Battery Saver Feature
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE manually. A courtesy light is also mounted in the head- liner above the second row passenger seats. Press and release the lens to turn ON or turn OFF the light manually. These lights also turn on when you press the UNLOCK button on the RKE transmitter, open a door or the liftgate, or turn the dimmer control completely up- ward to the second detent.
Page 130: Windshield Wiper Operation
Windshield Wiper Operation Rotate the end of the lever upward to the LO position for low-speed wiper operation. Rotate the end of the lever upward to the HI position for high-speed wiper operation. Front Wiper Control UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: The wipers will automatically return to the “park”...
Page 131: Intermittent Wiper System
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the park position. If the windshield wiper control is turned OFF and the blades cannot return to the park position, damage to the wiper motor may occur.
Page 132: Windshield Washers
to a maximum of approximately 18 seconds between cycles at vehicle speeds greater than 10 mph (16 km/h). NOTE: The wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield Washers To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as...
Page 133: Mist Feature
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Push downward on the windshield wiper/washer con- trol lever to activate a single wipe cycle to clear the windshield of road mist or spray from a passing vehicle. The wipers will continue to operate until you release the lever.
Page 134: Tilt/Telescoping Steering Column - If Equipped
TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column.
Page 135: Electronic Speed Control - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Control lever is located on the right side of the steering wheel.
Page 136: To Set A Desired Speed
WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system off when you are not using it. To Set a Desired Speed When the vehicle reaches the speed desired, press down- ward on the lever to SET DECEL and release.
Page 137: To Vary The Speed Setting
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary the Speed Setting When the Electronic Speed Control is set, you can in- crease speed by pushing up and holding the RESUME ACCEL lever. If the lever is continually held in the RESUME ACCEL position, the set speed will continue to increase until the lever is released, then the new set speed will be established.
Page 138: Parkview Rear Back Up Camera - If Equipped
WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your ve- hicle could go too fast for the conditions, and you could lose control. An accident could be the result. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.
Page 139: Turning Parkview On Or Off - With Navigation/Multimedia Radio
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • To avoid vehicle damage, the vehicle must be driven slowly when using ParkView to be able to stop in time when an obstacle is seen. It is recom- mended that the driver look frequently over his/ her shoulder when using ParkView .
Page 140: Overhead Console
4. When the vehicle is shifted into REVERSE, an image of the rear of the vehicle will appear with a caution note to “check entire surroundings” displayed across the top of the screen. 5. When the vehicle is shifted out of REVERSE, the rear camera mode is exited and the audio screen appears again.
Page 141: Sunglasses Storage
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunglasses Storage To access the storage compartment, press on the raised bars on the compartment door in the center of the console and release and the door will swing downward. Interior Observation Mirror The convex interior observation mirror provides the driver and front seat passenger a wide field of view to conveniently view passengers sitting in the rear passen-...
Page 142 HomeLink Buttons NOTE: HomeLink is disabled when the Vehicle Secu- rity Alarm is active. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 WARNING! • Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate.
Page 143: Programming Homelink
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink Before You Begin If you have not trained any of the HomeLink buttons, erase all channels before you begin training. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes.
Page 144 • After training a HomeLink channel, if the garage door does not operate with HomeLink and the ga- rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “Programming A Rolling Code System.”...
Page 145: Gate Operator/Canadian Programming
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer. NOTE: You have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7.
Page 146: Using Homelink
successfully accepted the frequency signal. The indica- tor light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Programming HomeLink ” earlier in this section. Using HomeLink To operate, press and release the programmed HomeLink button.
Page 147: Troubleshooting Tips
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips If you are having trouble programming HomeLink , here are some of the most common solutions: • Replace the battery in the original transmitter. • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code.
Page 148: Power Sunroof - If Equipped
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. Power sunroof Switch UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! • Never leave children in a vehicle with the key in the ignition switch.
Page 149: Opening Sunroof - Manually
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Manually Press and hold the switch in the rearward position. Release the switch when the sunroof is in the position desired and it will stop moving. If you continue to hold the switch in the rearward position, the sunroof will open fully and then stop automatically.
Page 150: Pinch Protect Override
Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.
Page 151: Ignition Off Operation
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ignition Off Operation For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
Page 152 Front Power Outlets 1 — Switched Power 2 — Battery Power UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 A third fused 12 Volt power outlet is located on the back of the center console. This power outlet has power available when the ignition switch is in the LOCK, ON or ACC position.
Page 153 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE A fourth fused 12 Volt power outlet is located on the left quarter trim panel in the cargo area. This power outlet has power available when the ignition switch is in the ON or ACC position. Rear Power Outlet NOTE: •...
Page 154: Power Inverter - If Equipped
WARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
Page 155 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE electronics and other low power devices requiring power up to 150 Watts. Certain high-end video games, such as Playstation3 and XBox360 will exceed this power limit, as will most power tools. Power Inverter The power inverter is designed with built-in overload protection.
Page 156 Power Inverter Switch Press and release the switch once to turn on the power outlet. A status indicator in the switch will illuminate in approximately one second to indicate that power is available at the outlet. Press and release the switch again to turn off the power outlet.
Page 157: Cupholders
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS There are two cupholders, located in the center floor console, for the front passengers. Center Console Cupholders For passengers in the second row there are two cuphold- ers, located in the center armrest between the two seats. Armrest Cupholders...
Page 158 For vehicles equipped with third row seating, there are additional cupholders located in the trim panels. Quarter Trim Panel Cupholders (Seven Passenger Models) In addition to cupholders, vehicles may also be equipped with bottle holders. The bottle holders are located on the door trim panels.
Page 159: Storage
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Instrument Panel Storage Compartment — If Equipped Press and release the button on the door to open it. The door swings upward to allow easy access to the compart- ment. Instrument Panel Storage Compartment Console Storage Open storage areas, or cubby bins, are located in the floor console and center console.
Page 160 Center Console Cubby Bin There is additional storage under the center console armrest. Pull upward on the release lever, located on the front of the lid. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Center Console Storage Bin NOTE: The sliding armrest (if equipped) must be in the rearward position to access the release button on the front of the bin door.
Page 161: Flip 'N Stow™ Front Passenger Seat Storage - If Equipped
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flip ’n Stow™ Front Passenger Seat Storage — If Equipped The seat latch release-loop is located in the center of the seat cushion between the seat cushion and the seatback. Pull the loop upward to release the latch and then forward to open the seat to the detent position.
Page 162: Second-Row Passenger Seat Temporary Storage Bin
Second-Row Passenger Seat Temporary Storage This is a temporary storage bin designed for use when the seatback/armrest is down. Be sure to remove all items from this bin before raising the seatback/armrest. Armrest Cubby Bin UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Second-Row Map Pocket and Grocery Retainers —...
Page 163: In-Floor Storage Bin With Removable Liner
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE In-Floor Storage Bin with Removable Liner NOTE: Position the front seat to at least a mid-track position to provide easier access to the storage bin. An in-floor storage bin is located behind each front seat. Each 1.6 gal (5.9 l) bin can hold up to 12, 12 oz (0.35 l) cans, plus ice, or other items.
Page 164: Chill Zone Beverage Cooler Storage Compartment
Removable Liner CHILL ZONE BEVERAGE COOLER STORAGE COMPARTMENT The Chill Zone Beverage Cooler Storage Compartment can keep chilled beverages cool depending on ambient temperature and climate control setting. Chill Zone is intended for nonperishable beverages only. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 The Chill Zone compartment is located on the passenger side of the instrument panel above the glove compart- ment.
Page 165: Chill Zone Beverage Cooler Operation
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press and release the button on the door to open it. the large door will swing upward to allow easy access to the compartment contents. Chill Zone Beverage Cooler Operation The blower speed setting on the climate control sets the rate at which the air flows into the compartment.
Page 166: Cargo Area Features
The compartment cools when the airflow is open, the engine is running and the Air Conditioning (A/C) is on or the Automatic Temperature Control (ATC) system is set for automatic operation (if equipped). This allows you to cool the compartment when the climate control is in the cooling or heating mode.
Page 167: Cargo Management System
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Management System Five Passenger System Features • A raised load floor that sits on top of a large built-in storage bin. • A tri-fold door built into the load floor that allows easy access to items in the built-in storage bin.
Page 168 Cargo Tie-Downs WARNING! Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers.
Page 169 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. To avoid loss of control resulting in per- sonal injury, follow these guidelines for loading your vehicle: •...
Page 170 The cover, when extended, covers the cargo area to keep items out of sight. Notches in the trim panels near the liftgate opening secure the extended cover in place. The cover rolls away neatly inside its housing when not in use. You can also remove the cover from the vehicle to make more room in the cargo area.
Page 171 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Grab the cover handle and pull it toward you. As the cover nears the liftgate opening, guide the rear attach- ment posts (on both ends of the cover) into the notches in the trim panels. Lower the cover to position the posts into the bottom of the notches and release the handle.
Page 172: Rear Window Features
REAR WINDOW FEATURES Rear Window Wiper/Washer The rear window wiper/washer control is located on the right side of the steering column. Rear Window Wiper/Washer Control UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Rotate the switch upward to the “On” position will activate the rear wiper.
Page 173: Rear Window Defroster
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Turn the rear wiper off when driving through an automatic car wash. Damage to the rear wiper may result if the rear wiper switch is left in the on position. • In cold weather, always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine.
Page 174: Roof Luggage Rack - If Equipped
CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
Page 175 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Move the Cross Rails 1. Loosen the knobs on top of each cross rail approxi- mately six turns to disengage the clamp tooth from the side rail. Roof Luggage Rack 2. Relocate the cross rails, aligning the cross rail stan- chions (end pieces) with one of the vertical marks on the outboard surface of the side rail for proper positioning.
Page 176 • To help reduce the amount of wind noise when the cross rails are not in use, fasten the front cross rail in the fourth position from the front and the rear cross rail in the eighth position. The tie down holes on the cross rail ends should always be used to tie down the load.
Page 177 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
Page 178 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....181 Instrument Cluster ....182 Instrument Cluster Descriptions .
Page 179 178 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode ..214 Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . 222 Notes On Playing MP3/WMA Files ..224 List Button (Disc Mode For MP3/WMA Play) .
Page 180 Operating Instructions — Uconnect™ Phone ....252 Clock Setting Procedure ....252 Uconnect™...
Page 181 180 UNDERSTANDING YOUR INSTRUMENT PANEL List Or Browse Mode ....265 Remote Sound System Controls — If Equipped ......267 Right-Hand Switch Functions .
Page 182: Instrument Panel Features
INSTRUMENT PANEL FEATURES 1 — Side Window Demist Outlet 2 — Air Outlet 3 — Instrument Cluster 4 — Storage Compartment or Remote Display Panel* UNDERSTANDING YOUR INSTRUMENT PANEL 181 5 — Hazard Switch 6 — Switch Bank 7 — Beverage Cooler/Storage Compartment* 8 —...
Page 183: Instrument Cluster
182 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 184: Instrument Cluster Descriptions
INSTRUMENT CLUSTER DESCRIPTIONS 1. Coolant Temperature Gauge The temperature gauge indicates engine coolant tem- perature. Any reading within the normal range indicates that the cooling system is operating satisfactorily. The gauge pointer will likely indicate a high temperature when driving in hot weather, up mountain grades, in heavy traffic, or when towing a trailer.
Page 185 184 UNDERSTANDING YOUR INSTRUMENT PANEL and idle the vehicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service. NOTE: As the coolant temperature gauge approaches H, this indicator will illuminate and a single chime will sound.
Page 186 7. Turn Signal Indicator Light The left or right arrow will flash in unison with the corresponding front and rear turn signal lights when the turn signal switch is operated. NOTE: • A chime will sound if the vehicle is driven more than 1 mi (1.6 km) with either turn signal on.
Page 187 186 UNDERSTANDING YOUR INSTRUMENT PANEL When blinking: The AWD system is temporarily dis- abled due to overload condition. 12. Tachometer This gauge measures engine revolutions per minute (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage. 13.
Page 188 Vehicle Odometer Messages When the appropriate conditions exist, the following messages will display in the odometer: ECO ....Fuel Saver Indicator Off ECO-on .
Page 189 188 UNDERSTANDING YOUR INSTRUMENT PANEL “clicking” sound is heard. Then press the TRIP ODOM- ETER button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL.
Page 190 1. Turn the ignition switch to the ON position. (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset.
Page 191 190 UNDERSTANDING YOUR INSTRUMENT PANEL If the light does not turn on during starting, have the system checked by an authorized dealer. If the light turns on and remains on while driving, safely bring the vehicle to a stop and shut off the engine. DO NOT OPERATE THE VEHICLE UNTIL THE CAUSE IS CORRECTED.
Page 192 Resetting the Trip Odometer Display the trip mileage that you want to reset, “Trip A” or “Trip B.” Then push and hold the button (approxi- mately two seconds) until the display resets to 0. The odometer must be in Trip Mode to reset the trip odom- eter.
Page 193 192 UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated.
Page 194 22. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.
Page 195 194 UNDERSTANDING YOUR INSTRUMENT PANEL Certain conditions such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the MIL after engine start. The vehicle should be serviced if the MIL stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
Page 196 Light” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see an authorized dealer as soon as possible.
Page 197 196 UNDERSTANDING YOUR INSTRUMENT PANEL The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake Warning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.
Page 198 The light also will turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 27.
Page 199: Compass Mini-Trip Computer (Cmtc) - If
198 UNDERSTANDING YOUR INSTRUMENT PANEL COMPASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED NOTE: • The compass on your vehicle is self-calibrating, elimi- nating the need to manually calibrate the compass. • If the vehicle is equipped with a Chrysler (Navigation Radio), the NAV system will provide the compass direction, and the variance and calibration menus will be unavailable.
Page 200 When the appropriate conditions exist, the following messages will display: NE ..Eight-point compass headings are displayed (N, S, E, W, NE, NW, SE, SW) 14°F... . Temperature (Fahrenheit or Celsius) AVG .
Page 201: Compass/Temperature Display
200 UNDERSTANDING YOUR INSTRUMENT PANEL Compass/Temperature Display Compass Variance Compass Variance is the difference between Magnetic North and Geographic North. To ensure compass accu- racy, the compass variance should be properly set accord- ing to the variance map for the zone where the vehicle will be driven.
Page 202 reset button (for approximately ten seconds) until the current variance zone number is displayed. To change the zone, press and release the CMTC reset button to increase the variance one step. Repeat as necessary until the desired variance is achieved. NOTE: The factory default zone is 8.
Page 203: Electronic Vehicle Information Center (Evic) - If Equipped
202 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display. It is located in the instrument cluster below the fuel and temperature gauges. Vehicles equipped with steering wheel-mounted buttons are also equipped with the EVIC.
Page 204 EVIC Steering Wheel Switches Press and release this button and the mode displayed will change between Compass/ Outside Temperature, Trip Functions, System Status, and Personal Settings. MENU Button UNDERSTANDING YOUR INSTRUMENT PANEL 203 Press this button to reset Trip Functions and change Personal Settings.
Page 205: Electronic Vehicle Information Center (Evic) Displays
204 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Vehicle Information Center (EVIC) Displays When the appropriate conditions exist, the EVIC displays the following messages: • Turn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mile [1.6 km] with either turn signal on) •...
Page 206: Oil Change Required
• Left Rear Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor” in “Starting And Operating”. • Right Front Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure Monitor”...
Page 207: Trip Functions
206 UNDERSTANDING YOUR INSTRUMENT PANEL MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedure: 1. Turn the ignition switch to the ON position (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds.
Page 208 and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the RESET button. NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value. •...
Page 209: Compass Display / Eco (Fuel Saver Mode) - If Equipped
208 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display / ECO (Fuel Saver Mode) — If Equipped Press and release this button to display one of eight compass readings and the outside temperature. The compass readings indicate the direction the ve- COMPASS/ hicle is facing.
Page 210 Manual Compass Calibration If the compass appears erratic or is inaccurate, you can calibrate the compass manually by performing the fol- lowing steps. 1. Turn the ignition switch ON. 2. Press and release the MENU button until Personal Settings displays in the EVIC. 3.
Page 211: Personal Settings (Customer-Programmable Features)
210 UNDERSTANDING YOUR INSTRUMENT PANEL • Magnetic materials should be kept away from the top of the instrument panel, as this is where the compass sensor is located. Compass Variance Map 1. Turn the ignition switch ON. 2. Press and release the MENU button until Personal Settings displays in the EVIC.
Page 212 “Language” When in this display you may select one of three lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the RESET button while in this display to select English, French, or Spanish. Then, as you continue, the informa- tion will display in the selected language.
Page 213 212 UNDERSTANDING YOUR INSTRUMENT PANEL “Flash Lamp With Lock” When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter. This feature may be selected with or without the sound horn on lock feature selected. To make your selection, press and release the RESET button until “ON”...
Page 214 “ILLUMIN Approach” When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the RKE transmitter. To make your selec- tion, press and hold the RESET button until “Off,” “30 sec,”...
Page 215: Media Center 230 (Req) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
214 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. REQ Radio Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Page 216 SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Page 217 216 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4.
Page 218 Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display. Turn the TUNE/ SCROLL control knob to the right or left to adjust the sound level from the right or left side speakers.
Page 219 218 UNDERSTANDING YOUR INSTRUMENT PANEL 16-Digit Character Program Type Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Program Type Display Jazz Top 40 News Weather Nostalga By pressing the SEEK button when the Music Type icon Oldies...
Page 220 SETUP Button Pressing the SETUP button allows you to select between the following items: NOTE: Turn the TUNE/SCROLL control knob to scroll through the entries. Push the AUDIO/SELECT button to select an entry and make changes. • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection.
Page 221 220 UNDERSTANDING YOUR INSTRUMENT PANEL • VES™ Lock - Locks out rear VES™ remote controls (if equipped). • VES™ CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2 wireless headphones by pressing the AUDIO/SELECT button (if equipped). •...
Page 222 the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select. Subtitles — If Equipped Selecting this item allows you to choose between subtitle Off or On. Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range.
Page 223: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
222 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM.
Page 224 NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the pushbutton with the corresponding number (1-6) where the CD is being loaded. The radio will display PLEASE WAIT and prompt when to INSERT DISC.
Page 225: Notes On Playing Mp3/Wma Files
224 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (CD MODE) Press the SCAN button to scan through each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released, or RW or...
Page 226 The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator . and a three- character extension) •...
Page 227 226 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Sampling Specification requency (kHz) MPEG-1 Audio 48, 44.1, 32 Layer 3 MPEG-2 Audio 24, 22.05, 16 Layer 3 Sampling Specification Frequency (kHz) 44.1 and 48 ID3 Tag information for artist, song title, and album title are supported for ID3 version 1 tags.
Page 228: List Button (Disc Mode For Mp3/Wma Play)
To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc.
Page 229 228 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down.
Page 230 Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Your Vehicle”. Operating Instructions - Uconnect™ Multimedia (Satellite Radio) (If Equipped) Refer to “Uconnect™ Multimedia (Satellite Radio)”. Operating Instructions - Video Entertainment System (VES)™ (If Equipped) Refer to separate “Video Entertainment System (VES)™...
Page 231: Media Center 130 (Res) - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
230 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (RES) — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. RES Radio Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Page 232 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. TIME Button Press the TIME button to alternate display of the time and radio frequency.
Page 233 232 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display.
Page 234: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display.
Page 235 234 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds.
Page 236: Notes On Playing Mp3 Files
the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or...
Page 237 236 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally.
Page 238 Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Page 239: Operation Instructions - Auxiliary Mode
238 UNDERSTANDING YOUR INSTRUMENT PANEL Loading times for playback of MP3 files may be affected by the following: • Media - CD-RW media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs •...
Page 240: Media Center 130 (Res/Rsc) - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack) And Sirius Radio
MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. RES/RSC Radio UNDERSTANDING YOUR INSTRUMENT PANEL 239 Operating Instructions —...
Page 241 240 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Page 242 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5.
Page 243 242 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display.
Page 244 16-Digit Character Program Type Display Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious Talk Rel Talk Rock Rock...
Page 245 244 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob.
Page 246: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC/AUX Button Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode. Operation Instructions —...
Page 247 246 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism.
Page 248: Notes On Playing Mp3 Files
RW/FF Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner. AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play.
Page 249 248 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
Page 250 MPEG Sampling Specification Frequency (kHz) MPEG-1 Audio 48, 44.1, 32 Layer 3 MPEG-2 Audio 24, 22.05, 16 Layer 3 ID3 Tag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios.
Page 251: List Button (Cd Mode For Mp3 Play)
250 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain...
Page 252: Media Center 830N (Reu) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd/Hdd/Nav Changer - If Equipped
TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is OFF). Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features If Your Vehicle”.
Page 253: Operating Instructions - Uconnect™ Multimedia (Satellite Radio)
252 UNDERSTANDING YOUR INSTRUMENT PANEL An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers. For vehicles equipped with the Video Entertainment System (VES)™, separate audio outputs allow passengers to listen to the vehicle speakers while different audio tracks play through the system’s wireless headphones.
Page 254 Changing the Time Zone NOTE: You can skip Steps 2 and 3 by pressing and holding the “TIME” button on the radio for three sec- onds. 1. Turn on the multimedia system. 2. Press and release the “SETUP” button on the radio. 3.
Page 255 254 UNDERSTANDING YOUR INSTRUMENT PANEL turn the knob surrounding the joystick to select “Time Setup,” and then press and release the joystick. 4. Turn the knob surrounding the joystick to scroll to “Daylight Savings,” and then press and release the joystick.
Page 256 6. Turn the knob surrounding the joystick to set the hour highlighted on the clock on the screen. Press and release the joystick when done. 7. Turn the knob surrounding the joystick to select “Set Minutes,” and then press and release the joystick. 8.
Page 257: Uconnect™ Multimedia (Satellite Radio) - If Equipped (Ren/Req/Rer/Res/Reu/Rbz Radios Only)
256 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect™ Multimedia (SATELLITE RADIO) — IF EQUIPPED (REN/REQ/RER/RES/REU/RBZ RADIOS ONLY) Satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for chil- dren, directly from its satellites and broadcasting studios.
Page 258: Selecting Uconnect™ Multimedia (Satellite) Mode
Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access With REN/RER/RBZ Radios While in SAT mode, press the MENU button on the radio faceplate.
Page 259: Operating Instructions - Uconnect™ Multimedia (Satellite) Mode
258 UNDERSTANDING YOUR INSTRUMENT PANEL • Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage.
Page 260 RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows. TUNE Control (Rotary) Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the channel. MUSIC TYPE Button —...
Page 261 260 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number. This number is used to activate, deactivate, or change the Sirius subscription.
Page 262: Operating Instructions - Uconnect™ Phone (If Equipped)
Operating Instructions — Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Your Vehicle”. Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “Video Entertainment System (VES)™ Guide.” Uconnect™ Multimedia (SIRIUS BACKSEAT TV™) —...
Page 263 262 UNDERSTANDING YOUR INSTRUMENT PANEL • The LCD Screen swings down from the console to allow the rear seat passenger(s) to view the display. VES™ with Rear HVAC Controls • The touch screen radio and DVD player controls allow front seat operation for easy setup in the case of younger rear seat passengers.
Page 264: Universal Consumer Interface (Uci) 0.5 - If Equipped
UNIVERSAL CONSUMER INTERFACE (UCI) 0.5 — IF EQUIPPED NOTE: This section is for sales code RES/REL and REQ/RET radios only with uconnect . For sales code RBZ/REN/REZ touch screen radio and REU/REX/RE1 radio, refer to the separate User’s Manual. This feature allows an iPod mobile digital device to be plugged into the vehicle’s sound system through a con- nector (UCI connector) using an optional connection cable (available through MOPAR ).
Page 265: Play Mode
264 UNDERSTANDING YOUR INSTRUMENT PANEL Play Mode When switched to UCI mode, the iPod automatically starts Play mode. In Play mode, use the following buttons on the radio faceplate to control the iPod and display data: Tune/Scroll Knob Use the Tune/Scroll knob to go to the next or previous track.
Page 266: List Or Browse Mode
previous track in the list; pressing this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list. INFO Button Press the INFO button while a track is playing to see the information (Track Title, Artist, Album, etc.) for that...
Page 267 266 UNDERSTANDING YOUR INSTRUMENT PANEL Tune/Scroll Knob In the List mode, the Tune/Scroll knob functions in a similar manner as the scroll wheel on the iPod . Turning the Tune/Scroll knob clockwise (forward) and counterclockwise (backward) scrolls through lists, dis- playing the track detail on the radio display.
Page 268: Remote Sound System Controls - If Equipped
LIST Button Pressing the LIST button will take the iPod to the top level menu. Turn the Tune/Scroll knob to list the top menu item to be selected and then press the Tune/Scroll knob. This will take jump to the next sub menu list item of the iPod and follow the same steps to go to the desired track in that list.
Page 269: Left-Hand Switch Functions For Radio Operation
268 UNDERSTANDING YOUR INSTRUMENT PANEL Left-Hand Switch Functions for Radio Operation • Press the top of the switch to SEEK the next listenable station up from the current setting. • Press the bottom of the switch to SEEK the next listenable station down from the current setting.
Page 270: Radio Operation And Cellular Phones
3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner, cleaners, or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7.
Page 271: Manual Heating And Air Conditioning System
270 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Heating and Air Conditioning System Single-Zone Manual Climate Control Blower Control There are four blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position.
Page 272 Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance. Mode Control Mode control allows you to choose from several selections of air distribu- tion. You can select either a primary mode, as identified by the symbols, or a blend of two of these modes.
Page 273 272 UNDERSTANDING YOUR INSTRUMENT PANEL Defrost Mode Air is directed through the windshield and side window demist outlets. Use DEFROST mode with maximum blower and temperature settings for best windshield and side window defrosting. NOTE: The air conditioning compressor operates in MIX and DEFROST, or a blend of these modes even if the A/C button is not pressed.
Page 274 • In order to prevent fogging, when the RECIRCULA- TION button is pressed and the mode control is set to PANEL, the A/C will engage automatically. • The A/C can be deselected manually without disturb- ing the mode control selection. Economy Mode If ECONOMY mode is desired, press the A/C button to turn off the indicator light and the A/C compressor.
Page 275: Three-Zone Manual Air Conditioning And Heating Systems - If Equipped
274 UNDERSTANDING YOUR INSTRUMENT PANEL Three-Zone Manual Air Conditioning and Heating Systems — If Equipped With the Three-Zone Temperature Control System, each front seat occupant can independently control the Heat- ing, Ventilation, and Air Conditioning operations coming from the outlets on their side of the vehicle. Three-Zone Manual Climate Control 1 —...
Page 276 The Three-Zone Temperature Control bottom panel controls rear Heating, Ventilation, and Air Conditioning operations. Three-Zone Manual Lower Climate Control (Rear - Zone Instrument Panel Control) 1 — RR Rear Control ON 3 — Rear Blower Speed 2 — Rear Blower OFF 4 —...
Page 277 276 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Blower Control The primary control for the rear blower is on the front climate control unit, located on the instrument panel. Only when the front control for the rear blower is in the RR position do the second row seat occupants have control of the rear blower speed.
Page 278: Two- And Three-Zone Automatic Temperature Control (Atc) Systems - If Equipped
Rear Mode Control Headliner Mode Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vanes of the outlets to one side will shut off the airflow. Bi-Level Mode Air comes from both the headliner outlets and the floor outlets.
Page 279 278 UNDERSTANDING YOUR INSTRUMENT PANEL The Two- and Three-Zone ATC System automatically maintain the interior comfort level desired by the driver and all passengers. The system automatically adjusts the air temperature, the airflow volume, amount of outside air recirculation and the airflow direction. This maintains a comfortable temperature, even under changing condi- tions.
Page 280 Three-Zone ATC 1 — System On/Off 7 — Front MODE 2 — Left Front Temperature 8 — RECIRCULATE 3 — Display Screen 9 — Front DEFROST 4 — Right Front Temperature 10 — Front Blower Speed 5 — Air Conditioning (A/C) 11 —...
Page 281 280 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Operation 1. Press the AUTO button on the Front Upper ATC Panel and the word AUTO will illuminate in the front ATC display, along with three temperatures for driver, front passenger, and rear seats. The system will then automati- cally regulate the amount of airflow.
Page 282 Manual Operation This system offers a full complement of manual override features. The AUTO symbol in the front ATC display will be turned off when the system is being used in the manual mode. NOTE: Each of these features operate independently from each other.
Page 283 282 UNDERSTANDING YOUR INSTRUMENT PANEL Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions.
Page 284 Recirculation Control When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the RECIRCULATION mode control button. RECIRCULATION mode should only be used temporarily. The recirculation symbol will illuminate in the display when this button is selected.
Page 285 284 UNDERSTANDING YOUR INSTRUMENT PANEL The Three-Zone ATC Climate control is located in the headliner, near the center of the vehicle. Rear-Zone ATC 1 — AUTO 4 — Rear MODE 2 — Blower Speed 5 — REAR LOCK 3 — Rear Temperature The Rear-Zone ATC for the rear passengers is in the overhead console above the second row passenger seats.
Page 286 NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to provide comfort as quickly as possible. • The temperature can be displayed in English or Metric units by selecting the “Display Units of Measure in”...
Page 287: Operating Tips
286 UNDERSTANDING YOUR INSTRUMENT PANEL When rear controls are locked by the front system, the LOCK symbol on the temperature knob is illuminated and any rear overhead adjustments are ignored. Rear Mode Control Auto Mode The rear system automatically maintains the correct mode and comfort level desired by the rear seat occu- pants.
Page 288 under “Maintenance Procedures” and to “Fluids, Lubri- cants, and Genuine Parts” in “Maintaining Your Vehicle” for information pertaining to the cooling system and coolant selection. Winter Operation Use of the air Recirculation mode during Winter months is not recommended because it may cause window fogging.
Page 289 288 UNDERSTANDING YOUR INSTRUMENT PANEL Outside Air Intake Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. In Winter months, make sure the air intake is clear of ice, slush, and snow.
Page 290 UNDERSTANDING YOUR INSTRUMENT PANEL 289 Control Setting Suggestions for Various Weather Conditions...
Page 292: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ....295 Automatic Transmission ....295 Normal Starting (Tip Start) .
Page 293 292 STARTING AND OPERATING All Wheel Drive (AWD) — If Equipped ..307 Driving On Slippery Surfaces ... . . 307 Acceleration ......307 Traction .
Page 294 Tire Inflation Pressures ....336 Radial-Ply Tires ..... 338 Compact Spare Tire .
Page 295 294 STARTING AND OPERATING Vehicle Loading ..... . 359 Vehicle Certification Label ....359 Gross Vehicle Weight Rating (GVWR) .
Page 296: Starting Procedures
STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
Page 297: Normal Starting (Tip Start)
296 STARTING AND OPERATING Normal Starting (Tip Start) NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages.
Page 298: After Starting
WARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
Page 299: Automatic Transmission
298 STARTING AND OPERATING The engine block heater cord is bundled under the hood between the headlight assembly and the Totally Inte- grated Power Module (Fuse Box) on the driver’s side of the vehicle. WARNING! Remember to disconnect the cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution.
Page 300 WARNING! • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse.
Page 301: Key Ignition Park Interlock
300 STARTING AND OPERATING Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Inter- lock which requires the shift lever to be placed in PARK prior to rotating the key fob to the LOCK position. The key fob can only be removed from the ignition when the ignition is in the LOCK position and once removed the shift lever is locked in PARK.
Page 302: Automatic Transmission Ignition Interlock System
Automatic Transmission Ignition Interlock System This system prevents the key fob from being removed unless the shift lever is in PARK. It also prevents shifting out of PARK unless the ignition switch is in the ON position and the brake pedal is applied. Four-Speed or Six-Speed Automatic Transmission The electronically controlled transmission provides a...
Page 303 302 STARTING AND OPERATING When parking on a flat surface, place the shift lever in the PARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK.
Page 304 NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill.
Page 305 304 STARTING AND OPERATING “3” (Drive) — Four-Speed Transmission This range eliminates shifts into “D” (Overdrive). The transmission will operate normally in first, second, and third gear while in this range. The “3” (Drive) range should also be used when descending steep grades to prevent brake system distress.
Page 306: Autostick - If Equipped
the vehicle to be driven to an authorized dealer for service without damaging the transmission. In the event of a momentary problem, the transmission can be reset to regain all forward gears by performing the following steps: 1. Stop the vehicle. 2.
Page 307: General Information
306 STARTING AND OPERATING and to the right (+) an upshift. The gear position will display in the instrument cluster on the transmission range indicator. NOTE: In AutoStick mode, the transmission will only shift up or down when the driver moves the shift lever to the right (+) or left (-).
Page 308: All Wheel Drive (Awd) - If Equipped
− If the system detects powertrain overheating, the transmission will revert to the automatic shift mode and remain in that mode until the powertrain cools off. − If the system detects a problem, it will disable the AutoStick mode and the transmission will return to the automatic mode until the problem is corrected.
Page 309: Traction
308 STARTING AND OPERATING WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet, mud, loose sand, etc.).
Page 310: Flowing/Rising Water
Flowing/Rising Water WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water.
Page 311 310 STARTING AND OPERATING CAUTION! • Driving through standing water may cause dam- age to your vehicle’s drivetrain components. Al- ways inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water.
Page 312: Power Steering
POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle.
Page 313: Power Steering Fluid Check
312 STARTING AND OPERATING Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.
Page 314 The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully. To release the parking brake, press the park brake pedal a second time and let your foot up as you feel the brake disengage.
Page 315 314 STARTING AND OPERATING difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle. WARNING! • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage.
Page 316: Brake System
BRAKE SYSTEM Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. However, there will be some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop the vehicle.
Page 317: Anti-Lock Brake System (Abs)
316 STARTING AND OPERATING Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lock-up to help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System (ABS)”...
Page 318: Electronic Brake Control System
ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system commonly referred to as ESP. This system includes Anti-Lock Brake System (ABS), Brake Assist System (BAS), Traction Control System (TCS), Electronic Roll Mitigation (ERM), and Electronic Stability Program (ESP).
Page 319 318 STARTING AND OPERATING These are all normal characteristics of ABS. WARNING! • The ABS contains sophisticated electronic equip- ment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capa- bility.
Page 320: Brake Assist System (Bas)
Anti-Lock Brake Light The Anti-Lock Brake Light monitors the ABS. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS Light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.
Page 321: Traction Control System (Tcs)
320 STARTING AND OPERATING WARNING! BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
Page 322: Electronic Stability Program (Esp)
driving maneuvers. It cannot prevent wheel lift due to other factors, such as road conditions, leaving the road- way, or striking objects or other vehicles. WARNING! Many factors, such as vehicle loading, road condi- tions, and driving conditions, influence the chance that wheel lift or rollover may occur.
Page 323 322 STARTING AND OPERATING ESP/TCS Indicator Light The ESP/TCS Indicator Light located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. The ESP/TCS Indicator Light also flashes when TCS is active. If the ESP/TCS Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible.
Page 324 Full On This is the normal operating mode for ESP. Whenever the vehicle is started the system will be in this mode. This mode should be used for most driving situations. ESP should only be turned to “Partial Off” for specific reasons as noted.
Page 325: Esp/Bas Warning Light And Esp/Tcs Indicator Light
324 STARTING AND OPERATING ESP/BAS Warning Light and ESP/TCS Indicator Light The malfunction indicator for the ESP is com- bined with the BAS indicator. The ESP/BAS Malfunction Indicator Light and the ESP/TCS Indicator Light in the instrument cluster both turn on when the ignition switch is turned to the ON position.
Page 326: Tire Safety Information
NOTE: The TSC is disabled when the ESP system is in the “Partial Off” mode. WARNING! • TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommendations. Refer to ”Ve- hicle Loading”...
Page 327 326 STARTING AND OPERATING NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards.
Page 328 Tire Sizing Chart Size Designation: P = Passenger Car tire size based on U.S. design standards ...blank... = Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%)
Page 329 328 STARTING AND OPERATING Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 330 Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation —...
Page 331: Tire Terminology And Definitions
330 STARTING AND OPERATING Tire Terminology and Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof.
Page 332: Tire Loading And Tire Pressure
Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire Placard Location STARTING AND OPERATING 331 Tire and Loading Information Placard Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle...
Page 333 332 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading”...
Page 334 available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
Page 335 334 STARTING AND OPERATING...
Page 336: Tires - General Information
WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
Page 337: Tire Inflation Pressures
336 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure.
Page 338 CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.”...
Page 339: Radial-Ply Tires
338 STARTING AND OPERATING loading may be required for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures. WARNING! High speed driving with your vehicle under maxi- mum load is dangerous.
Page 340: Tire Spinning
WARNING! Temporary use spare tires are for emergency use only. With these tires, do not drive more than 50 mph (80 km/h). Temporary-use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced.
Page 341: Tread Wear Indicators
340 STARTING AND OPERATING Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Page 342: Life Of Tire
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure.
Page 343 342 STARTING AND OPERATING WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
Page 344: Tire Chains
TIRE CHAINS Due to limited clearance, tire chains are not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country require the use of snow tires during the winter. Standard tires are of the all season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall.
Page 345: Tire Pressure Monitor System (Tpms)
344 STARTING AND OPERATING Refer to “Maintenance Schedule” for the proper mainte- nance intervals. More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed. The suggested rotation method is shown in the following diagram.
Page 346 The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.
Page 347 346 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style.
Page 348: Base System
• Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in the tire. Base System The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the receiver module.
Page 349 348 STARTING AND OPERATING sequence will repeat, providing the system fault still exists. The Tire Pressure Monitoring Telltale light will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 1.
Page 350: Premium System - If Equipped
Telltale light will turn off, as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information.
Page 351 350 STARTING AND OPERATING Should this occur, you should stop as soon as possible and inflate the tires with low pressure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flash- ing, and the Tire Pressure Monitoring Telltale light will...
Page 352 If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the Tire Pressure Monitoring Telltale light will no longer flash, and the CHECK TPM SYS- TEM message will no longer display, and a pressure value will display in place of the dashes.
Page 353: General Information
352 STARTING AND OPERATING Telltale light will remain on and a chime will sound. In addition, the graphic in the EVIC will still display a flashing pressure value. 3. After driving the vehicle for up to 20 minutes above 15 mph (25 km/h), the TPMS Telltale light will flash on and off for 75 seconds and then remain on solid.
Page 354: Fuel Requirements
The tire pressure sensors are covered under one of the following licenses: United States ..... KR5S120123 Canada ......2671-S120123 FUEL REQUIREMENTS 2.4L Engine All engines are designed to meet all emis-...
Page 355: Reformulated Gasoline
354 STARTING AND OPERATING Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the World Wide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recom- mends the use of gasolines that meet the WWFC speci- fications, if they are available.
Page 356: Mmt In Gasoline
MMT In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles.
Page 357: Carbon Monoxide Warnings
356 STARTING AND OPERATING CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service.
Page 358: Adding Fuel
WARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous exhaust gases from entering the vehicle.
Page 359 358 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. •...
Page 360: Loose Fuel Filler Cap Message
• When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the word “gASCAP” will display in the odometer. If this occurs, tighten the fuel filler cap until a “clicking”...
Page 361: Gross Vehicle Weight Rating (Gvwr)
360 STARTING AND OPERATING • Type of Vehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the VIN. Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo.
Page 362: Loading
Figure out the weight on the front and rear of the vehicle separately. It is important that you distribute the load evenly over the front and rear axles. Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle’s GVWR.
Page 363 362 STARTING AND OPERATING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting and Operating” for further information. Gross Trailer Weight (GTW) The GTW is the weight of the trailer plus the weight of all cargo, consumables, and equipment (permanent or tem- porary) loaded in or on the trailer in its loaded and ready for operation condition.
Page 364 Frontal Area The frontal area is the maximum height multiplied by the maximum width of the front of a trailer. Trailer Sway Control – Electronic Refer to “Electronic Brake Control System/Trailer Sway Control (TSC)” in “Starting and Operating” for further information.
Page 365 364 STARTING AND OPERATING WARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability, braking performance, and could result in an accident. • Weight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable rec- reational vehicle...
Page 366 STARTING AND OPERATING 365 With Weight-Distributing Hitch (Correct) Improper Adjustment of Weight-Distributing Hitch (Incorrect)
Page 367: Trailer Hitch Classification
366 STARTING AND OPERATING Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See your authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
Page 368: Trailer Towing Weights (Maximum Trailer Weight Ratings)
Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. GCWR (Gross Com - Engine/Transmission bined Wt. Rating) 2.4L/Automatic 6,000 lbs (2 722 kg) 7,300 lbs (3 311 kg) 3.5L/Automatic (without Trailer Tow 7,300 lbs (3 311 kg)
Page 369 368 STARTING AND OPERATING Engine/Transmission GCWR (Gross Com bined Wt. Rating) 8,300 lbs (3 765 kg) 8,300 lbs (3 765 kg) 3.5L/Automatic (with Trailer Tow Prep Package 8,300 lbs (3 765 kg) 8,300 lbs (3 765 kg) Max. GTW (Gross Frontal Area Trailer Wt.) 3,500 lbs (1 588 kg)
Page 370: Trailer And Tongue Weight
NOTE: • The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information” in “Starting and Operating” for further information.
Page 371: Towing Requirements
370 STARTING AND OPERATING Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer. • The weight of any other type of cargo or equipment put in or on your vehicle. •...
Page 372 WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
Page 373 372 STARTING AND OPERATING WARNING! (Continued) 3. GAWR 4. Tongue weight rating for the trailer hitch utilized. (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight.) Towing Requirements –...
Page 374 actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg).
Page 375 374 STARTING AND OPERATING Towing Requirements – Trailer Lights and Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven- pin wiring harness.
Page 376: Towing Tips
Seven-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 — Left Stop/Turn 3 — Right Stop/Turn 7 — Running Lamps 4 — Electric Brakes STARTING AND OPERATING 375 Towing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic.
Page 377 376 STARTING AND OPERATING “police, taxi, fleet, or frequent trailer towing.” Refer to “Maintenance Schedule” for the proper maintenance intervals. NOTE: Check the four-speed transmission fluid level before towing. The six-speed transmission is sealed and the fluid level cannot be checked. See your authorized dealer for assistance.
Page 378: Recreational Towing (Behind Motorhome, Etc.)
Cooling System To reduce potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods, shift the transmission into NEUTRAL and increase engine idle speed. − Highway Driving Reduce speed. − Air Conditioning Turn off temporarily.
Page 380: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....380 If Your Engine Overheats ....380 Jacking And Tire Changing .
Page 381: Hazard Warning Flasher
380 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The Hazard Warning flasher switch is located in the instrument panel switch bank, above the climate controls. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency.
Page 382: Jacking And Tire Changing
NOTE: There are steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help remove this heat. •...
Page 383: Jack Location
382 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
Page 384: Spare Tire Location
Spare Tire Location The spare tire is stowed underneath the rear of the vehicle and is held in place by means of a cable winch mechanism. Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible, avoid icy or slippery areas.
Page 385 384 WHAT TO DO IN EMERGENCIES 1. Remove the jack-handle components 1, 2 and 3 from storage and assemble them. Lowering/Raising Spare Tire NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3.
Page 386: Spare Tire Stowage
4. Tilt the retainer at the end of the winch cable and remove it from the center of the wheel. Spare Tire Retainer WHAT TO DO IN EMERGENCIES 385 Spare Tire Stowage NOTE: On seven-passenger models, fold the third-row passenger seats flat. This will provide more space when accessing the jacking tools and when operating the winch mechanism.
Page 387 386 WHAT TO DO IN EMERGENCIES Lowering/Raising Spare Tire NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together.
Page 388: Jacking Instructions
4. Tilt the retainer at the end of the winch cable and drop it through the center of the wheel. Then place the spare tire with the cable and retainer underneath the vehicle. Spare Tire Retainer 5. Fit the assembled jack-handle over the winch drive nut.
Page 389 388 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. •...
Page 390 WHAT TO DO IN EMERGENCIES 389 Front Jacking Location Rear Jacking Location 4. Raise the vehicle by turning the jack screw clockwise with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tire.
Page 391 390 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel nuts. For vehicles so equipped, remove the wheel cover from the wheel by hand.
Page 392 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury or death. 8. Lower the vehicle by turning the jack screw counter- clockwise with the jack handle.
Page 393: Jump-Starting
392 WHAT TO DO IN EMERGENCIES 14. Check the tire pressure as soon as possible. Adjust the tire pressure as required. Wheel Nuts Tighten all wheel nuts occasionally to eliminate the possibility of wheel studs being sheared or the bolt holes in the wheels becoming elongated.
Page 394: Preparations For Jump-Start
WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations for Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield.
Page 395 394 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
Page 396: Jump-Starting Procedure
WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure WARNING! Failure to follow this procedure could result in per- sonal injury or property damage due to battery ex- plosion.
Page 397: Freeing A Stuck Vehicle
396 WHAT TO DO IN EMERGENCIES 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. Once the engine is started, remove the jumper cables in the reverse sequence: 6.
Page 398 front wheels. Then shift back and forth between RE- VERSE and 1st gear. Using the least accelerator pedal pressure to maintain the rocking motion without spin- ning the wheels is most effective. NOTE: If your vehicle is equipped with Traction Con- trol, turn the system OFF before attempting to “rock”...
Page 399: Towing A Disabled Vehicle
398 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE Without The Ignition Key Front Wheel Drive (FWD) Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is the preferred towing method. However, if a flatbed towing vehicle is not available, a wheel lift towing vehicle may be used.
Page 400 CAUTION! (Continued) • Do not attempt to tow this vehicle from the front with sling-type towing equipment. Damage to the front fascia will result. • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and trans- axle may result.
Page 401: Towing This Vehicle Behind Another Vehicle With A Tow Dolly
400 WHAT TO DO IN EMERGENCIES • The distance to be traveled must not exceed 15 miles (25 km). • The towing speed must not exceed 25 mph (40 km/h), and both front and rear wheels must be on the ground. CAUTION! Exceeding these towing limits may cause a transaxle failure.
Page 402: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — 2.4L ... . . 403 Engine Compartment — 3.5L ... . . 404 Onboard Diagnostic System —...
Page 403 402 MAINTAINING YOUR VEHICLE Exhaust System ..... 421 Cooling System ..... 424 Brake System .
Page 404: Engine Compartment - 2.4L
ENGINE COMPARTMENT — 2.4L 1 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 3 — Engine Oil Fill 4 — Brake Fluid Reservoir 5 — Remote Jump Start (Positive Battery Post) 6 — Remote Jump Start (Negative Battery Post) MAINTAINING YOUR VEHICLE 403 7 —...
Page 405: Engine Compartment - 3.5L
404 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.5L 1 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 3 — Brake Fluid Reservoir 4 — Remote Jump Start (Positive Battery Post) 5 — Remote Jump Start (Negative Battery Post) 6 —...
Page 406: Onboard Diagnostic System - Obd Ii
ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emis- sions well within current government regulations.
Page 407: Emissions Inspection And Maintenance Programs
406 MAINTAINING YOUR VEHICLE A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of this vehicle’s emissions control system. Failure to pass could prevent vehicle registration.
Page 408: Replacement Parts
the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will remain fully illuminated until you turn OFF the ignition key or start the engine.
Page 409: Maintenance Procedures
408 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. WARNING! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment.
Page 410: Engine Oil
CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning.
Page 411 410 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance.
Page 412 Engine Oil Viscosity (SAE Grade) – 2.4L Engine SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on the engine oil filler cap location, refer to “Engine Com- partment”...
Page 413: Engine Oil Filter
412 MAINTAINING YOUR VEHICLE Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment.
Page 414: Maintenance-Free Battery
used to assure most efficient service. MOPAR engine air cleaner filters are a high quality filter and are recommended. Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- tenance required.
Page 415: Air Conditioner Maintenance
414 MAINTAINING YOUR VEHICLE CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and are identified on the battery case.
Page 416 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Warranty Information Book, located on the DVD, for further warranty information.
Page 417: A/C Air Filter - If Equipped
416 MAINTAINING YOUR VEHICLE A/C Air Filter – If Equipped Refer to “Maintenance Schedule” for further information. WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box.
Page 418: Body Lubrication
A/C Air Filter Replacement 5. Remove the A/C air filter by pulling it straight out of the housing. 6. Install the A/C air filter with the arrow on the filter pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover.
Page 419: Wiper Blades
418 MAINTAINING YOUR VEHICLE grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated.
Page 420 Rear Wiper Removal/Installation 1. Lift the pivot cap on the rear wiper arm upward, this will allow the rear wiper blade to be raised off of the liftgate glass. 1 — Wiper Arm 2 — Pivot Cap MAINTAINING YOUR VEHICLE 419 NOTE: The rear wiper arm cannot be raised fully upward unless the pivot cap is raised first.
Page 421: Adding Washer Fluid
420 MAINTAINING YOUR VEHICLE 3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 1 — Wiper Blade 2 — Blade Pivot Pin 3 — Wiper Arm 4 —...
Page 422: Exhaust System
To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. The fluid reservoir will hold nearly 1 gal (4 l) of washer fluid when the message “LoWASH”...
Page 423 422 MAINTAINING YOUR VEHICLE WARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle”...
Page 424 Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
Page 425: Cooling System
424 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at any time the ignition switch is in the ON position.
Page 426 Cooling System – Drain, Flush and Refill Refer to “Maintenance Schedule” for further information. If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals.
Page 427 426 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (anti- freeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Your vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
Page 428 Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent engine coolant (antifreeze) changes.
Page 429 428 MAINTAINING YOUR VEHICLE Disposal of Used Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals or children, do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 430 humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot engine coolant (antifreeze) to enter the radiator. If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven.
Page 431: Brake System
430 MAINTAINING YOUR VEHICLE Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Refer to “Maintenance Schedule” for further information. WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
Page 432 WARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also labeled on the origi- nal factory installed hydraulic master cylinder reservoir.
Page 433: Automatic Transmission
432 MAINTAINING YOUR VEHICLE WARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Automatic Transmission The automatic transmission and differential assembly are contained within a single housing.
Page 434 a. If the fluid is hot, the reading should be in the crosshatched area marked “HOT” (between the upper two holes in the dipstick). b. If the fluid is cold, the fluid level should be between the lower two holes in the area marked “COLD.” If the fluid level is low, add sufficient fluid through the filler (dipstick) tube to bring it to the proper level.
Page 435 434 MAINTAINING YOUR VEHICLE Fluid Level Check – 3.5L Engine The automatic transmission has no dipstick and is dealer serviced only. Fluid and Filter Changes Refer to “Maintenance Schedule” for further information. In addition, change the fluid and filter if the transmission is disassembled for any reason.
Page 436: Appearance Care And Protection From Corrosion
Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and road surfaces during other seasons are highly corrosive to the metal in your vehicle.
Page 437 436 MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumu- lated on your vehicle, use MOPAR Super Kleen Bug and Tar Remover or equivalent to remove. • Use a high quality cleaner wax, such as MOPAR Cleaner Wax to remove road film, stains and to protect your paint finish.
Page 438 • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. •...
Page 439 438 MAINTAINING YOUR VEHICLE • Do not use any harsh solvents or any other form of protectants on Stain Repel products. Interior Care Instrument Panel Cover The instrument panel cover has a low glare surface, which minimizes reflections in the windshield. Do not use protectants or other products, which may cause undesirable reflections.
Page 440 WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed.
Page 441: Cleaning The Cupholders
440 MAINTAINING YOUR VEHICLE 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners.
Page 442 Totally Integrated Power Module (TIPM) MAINTAINING YOUR VEHICLE 441 CAUTION! • When installing the power module cover, it is important to ensure the cover is properly posi- tioned and fully latched. Failure to do so may allow water to get into the TIPM, and possibly result in an electrical system failure.
Page 443 442 MAINTAINING YOUR VEHICLE Cartridge Mini- Cavity Fuse Fuse 40 Amp — Green 30 Amp — Pink 30 Amp — Pink 25 Amp — Natural 25 Amp — Natural 40 Amp Green — Description Cavity Power Folding Seat Transfer Case Module –...
Page 444 Cartridge Mini- Cavity Fuse Fuse 60 Amp Ignition Off Draw — Yellow (IOD) Main 40 Amp Electric Back Light — Green (EBL) 30 Amp Rear Blower – If — Pink Equipped 40 Amp Starter Solenoid — Green 20 Amp NGC (Powertrain Blue —...
Page 445 444 MAINTAINING YOUR VEHICLE Cartridge Mini- Cavity Fuse Fuse 20 Amp — Yellow 20 Amp — Yellow 20 Amp — Yellow Description Cavity Power Outlet #2 (Bat- tery or Accessory (ACC) Selectable) Front Heated Seats – If Equipped Rear Heated Seats – If Equipped Cartridge Mini-...
Page 446 Cartridge Mini- Cavity Fuse Fuse 30 Amp Radio, Amplifier — Green (AMP) 20 Amp Cabin Compartment Yellow Node (CCN), Multi- — function Switch/Siren Module, ITM 20 Amp Trailer Tow (BUX) – If — Yellow Equipped 20 Amp Auto Dim Rearview Yellow Mirror –...
Page 447 446 MAINTAINING YOUR VEHICLE Cartridge Mini- Cavity Fuse Fuse 15 Amp Blue — 20 Amp — Yellow 10 Amp — 10 Amp — 25 Amp — Natural Description Cavity Electronic Vehicle In- formation Center (EVIC) – If Equipped, Interior Lighting, Steering Wheel Switches –...
Page 448 Cartridge Mini- Cavity Fuse Fuse 15 Amp Rear Wiper Module Blue Module/Power Fold- — ing Mirror, J1962 Diag Feed 20 Amp Back-Up Lights — Yellow 10 Amp Occupant Restraint — Controller (ORC) 10 Amp NGC (Powertrain — Control Module) Bat- tery Feed/TCM Cartridge Description...
Page 449: Vehicle Storage
448 MAINTAINING YOUR VEHICLE Cartridge Mini- Cavity Fuse Fuse 25 Amp — Natural — — — — — — — — — — — — Description Lock/Unlock Motors Ignition Run/ Accessory Relay Ignition Run Relay Starter Solenoid Relay VEHICLE STORAGE Ignition Run/Start If you will not be using your vehicle for more than Relay...
Page 450: Replacement Bulbs
REPLACEMENT BULBS All the inside bulbs are brass or glass wedge base. Aluminum base bulbs are not approved and should not be used for replacement. LIGHT BULBS – Interior Courtesy/Reading Lamps (Incandescent) ..578 Courtesy/Reading Lamps (Optional LED) .
Page 451: Bulb Replacement
450 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Low Beam Headlamp, High Beam Headlamp, Front Turn Signal/Park Lamp, Side Marker Lamp 1. Open the hood. NOTE: It may be necessary to remove the air cleaner filter housing and position the Totally Integrated Power Module (TIPM) aside to replace certain lamps in the left headlamp housing.
Page 452: Front Fog Lamp
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the headlamp housing and rotate it ⁄...
Page 453: Tail/Stop Lamp, Rear Turn Signal Lamp, Tail Lamp, Backup Lamp
452 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the fog lamp housing and rotate the connector to lock it in place.
Page 454 6. Install the bulb and connector assembly into the taillamp housing and rotate the connector wise to lock it in place. 7. Reinstall the taillamp housing and fasteners. Changing the Tail Lamp or Backup Lamp 1. Open the liftgate. 2. Remove the two fasteners retaining the taillamp hous- ing to the liftgate from the inboard face of the liftgate.
Page 455: License Plate Lamp
454 MAINTAINING YOUR VEHICLE 7. Reinstall the taillamp housing and fasteners. License Plate Lamp 1. Push the small locking tab sticking out of the end of the lens toward the side of the vehicle and hold it in that position. License Lamp 2.
Page 456: Fluid Capacities
FLUID CAPACITIES Fuel (Approximate) Front Wheel Drive (FWD) Models with 2.4L PZEV Engine Front Wheel Drive (FWD) Models without 2.4L PZEV and 3.5L Engine All-Wheel Drive Models Engine Oil with Filter 2.4L Engine (SAE 5W-20, API Certified) 3.5L Engine (SAE 10W-30, API Certified) Cooling System * 2.4L Engine and Single- or Dual-Zone Climate Control System (MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent)
Page 457: Fluids, Lubricants, And Genuine Parts
456 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 2.4L Engine Engine Oil – 3.5L Engine Engine Oil Filter Spark Plugs – 2.4L Engine Spark Plugs – 3.5L Engine Fuel Selection – 2.4L Engine Fuel Selection –...
Page 458: Chassis
Chassis Component Automatic Transmission Power Transfer Unit (PTU) Rear Drive Assembly (RDA) Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. MOPAR Gear Lubricant 75W-90 or equivalent. MOPAR Gear Lubricant 75W-90 or equivalent. MOPAR DOT 3, SAE J1703 or equivalent should be used.
Page 460 MAINTENANCE SCHEDULES CONTENTS Emissions Control System Maintenance ..460 Maintenance Schedule ....460 Required Maintenance Intervals ..462...
Page 461 460 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Con- trol System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
Page 462 NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated.
Page 463 462 MAINTENANCE SCHEDULES Once a Month • Check tire pressure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of coolant reservoir, brake master cylinder, and transmission and add as needed. •...
Page 464 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏...
Page 465: Service Schedule
464 MAINTENANCE SCHEDULES 18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏...
Page 466 30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs (2.4L Engine). Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 36,000 Miles (60,000 km) or 36 Months Maintenance Service...
Page 467 466 MAINTENANCE SCHEDULES 42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏...
Page 468 54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏...
Page 469 468 MAINTENANCE SCHEDULES 66,000 Miles (110,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏...
Page 470 78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏...
Page 471 470 MAINTENANCE SCHEDULES 90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs (2.4L Engine). ❏ Inspect and replace PCV valve if necessary.†...
Page 472 102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Flush and replace the engine coolant. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏...
Page 473 472 MAINTENANCE SCHEDULES 114,000 Miles (190,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏...
Page 474 126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏...
Page 475 474 MAINTENANCE SCHEDULES 138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏...
Page 476 150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs (2.4L Engine). Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer MAINTENANCE SCHEDULES 475...
Page 478: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle......479 Prepare For The Appointment .
Page 479 478 IF YOU NEED CONSUMER ASSISTANCE Publication Order Forms ....483 Department Of Transportation Uniform Tire Quality Grades ......485 Treadwear .
Page 480: Suggestions For Obtaining Service For Your Vehicle
SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty.
Page 481: Chrysler Group Llc Customer Center
480 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Page 482: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommuni- cation Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
Page 483: Warranty Information
482 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience.
Page 484: In Canada
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer.
Page 485 484 IF YOU NEED CONSUMER ASSISTANCE vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer-controlled ve- hicle systems and features.
Page 486 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle.
Page 487 486 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 488 INDEX...
Page 489 488 INDEX About Your Brakes ....312,315 ABS (Anti-Lock Brake System) ..193,316,317 Adding Engine Coolant (Antifreeze) .
Page 490 Auto Unlock, Doors ..... . . 30 Automatic Dimming Mirror ....95 Automatic Door Locks .
Page 491 490 INDEX Warning Light ......195 Brakes ......315,430 Brake/Transaxle Interlock .
Page 492 Checking Your Vehicle For Safety ... . . 84 Checks, Safety ......84 Child Booster Seat .
Page 493 492 INDEX Selection of Coolant (Antifreeze) ..425,455,456 Temperature Gauge ....183 Corrosion Protection ..... 435 Cruise Control (Speed Control) .
Page 494 Anti-Lock Brake System ....316 Brake Assist System ....319 Electronic Roll Mitigation .
Page 495 494 INDEX Oil Synthetic ......411 Operation ......83 Overheating .
Page 496 Engine Oil ......409 Power Steering ..... 312,457 Fluids .
Page 497 496 INDEX Odometer ......186 Speedometer ......185 Tachometer .
Page 498 Hitches Trailer Towing ......366 Holder, Coin ......158 Holder, Cup .
Page 499 498 INDEX Keys ....... . . 12 Knee Bolster ......54 Lane Change and Turn Signals .
Page 500 Headlight Switch ....121,122 Headlights ......122,450 Headlights On Reminder .
Page 501 500 INDEX Power Door ......29 Low Tire Pressure System ....344 Lower Anchors and Tether for CHildren (LATCH) .
Page 502 Navigation Radio (Uconnect gps) Navigation System (Uuconnect gps) ..137,251 New Vehicle Break-In Period ....83 Occupant Restraints ....39,61,66 Occupant Restraints (Sedan) .
Page 503 502 INDEX Passenger Seat Back Tilt (Easy Entry System) ..114 Passing Light ......127 Personal Settings .
Page 504 Rear Air Conditioning ....283 Rear Camera ......137 Rear Cupholder .
Page 505 504 INDEX Safety Checks Outside Vehicle ....88 Safety Defects, Reporting ....482 Safety, Exhaust Gas .
Page 506 Sentry Key (Immobilizer) ....15 Sentry Key Programming ....17 Sentry Key Replacement .
Page 507 506 INDEX Steering Column Lock ......133 Power ......311,312 Tilt Column .
Page 508 Chains ......343 Changing ......381 Compact Spare .
Page 509 508 INDEX Trailer and Tongue Weight ....369 Wiring ......374 Trailer Towing Guide .
Page 510 Vanity Mirrors ......97 Variance, Compass ....200,209 Vehicle Certification Label .
Page 511 510 INDEX Windshield Wiper Blades ....418 Windshield Wipers ..... . . 128 Wiper Blade Replacement .
Page 512 Chrysler Group LLC 10D41-126-AC Printed in U.S.A. 3rd Edition...

Dodge 2010 Journey Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Dodge 2010 Journey

Summary of Contents for Dodge 2010 Journey