Installing the server bezel and top cover (rack configuration)
The following illustration shows how to install the bezel on a rack configuration
server.
Complete the following steps to install the bezel:
1. Review the information in "Installation guidelines" on page 45, "Handling
2. Insert the two tabs on the bottom of the bezel into the matching holes on the
3. Push the top of the bezel toward the server until the two tabs at the top of the
The following illustration shows how to install the server top cover on a rack
configuration server.
static-sensitive devices" on page 46, and "Safety information" on page 169.
server chassis.
bezel snap into place.
Flange
Bezel
Flange
Top cover
Cover release
latch
Chapter 4. Customer replaceable units
103