Installing The Server Bezel And Left-Side Cover (Tower Model) - IBM 8671 - Eserver xSeries 235 Maintenance And Troubleshooting Manual

Installing the server bezel and left-side cover (tower model)

The following illustration shows how to install the bezel on the tower model server.
Complete the following steps to install the bezel:
1. Review the information in "Installation guidelines" on page 45, "Handling
2. Insert the two tabs on the bottom of the bezel into the matching holes on the
3. Push the top of the bezel toward the server until the two tabs at the top of the
100
xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide
static-sensitive devices" on page 46, and "Safety information" on page 169.
server chassis.
bezel snap into place.
Bezel