Bios Post Beep Codes; Table 6. Post Error Beep Codes - Intel SR1475NH1 - Server Platform - 0 MB RAM User Manual

Table 5. LED Information
LED Name
System Fault Visible fault warning
Drive Activity

BIOS POST Beep Codes

The table below lists the POST error beep codes. Prior to system video initialization, the
BIOS uses these beep codes to inform users of error conditions. Please note that not all
error conditions are supported by BIOS beep codes.

Table 6. POST Error Beep Codes

Number of Beeps
1, 2, or 3
4 - 7 or 9 - 11
8
32 Intel
Function
Control panel
and board rear
left corner
Reason for Beeps and Action to Take
Memory error. Re-seat the memory or replace the DIMMs with known good modules.
Fatal error indicating a possible serious system problem. Remove all add-in cards and
re-start the system. If the error still occurs, contact your system manufacturer. If the
beep codes are not generated after the add-in cards are removed, insert the cards one
at a time, booting the system between each card addition, until the beeps again occur
to reveal the malfunctioning card.
Replace or re-seat the system video add-in card. If on-board video is being used, the
server board may be faulty.
®
Server Board SE7230NH1-E and Intel
Location LED Color
Green or Amber Green = No Fault
®
Server Platform SR1475NH1-E User's Guide
Notes
Green blinking = degraded
condition
Amber blinking = non-
critical error
Amber = critical or non-
recoverable error