Installing A Hard Drive; Removing An Air Baffle From A Drive Carrier - Intel SE7500WV2 - Server Chassis - SR2300 Product Manual

Installing a Hard Drive

The server can support up to seven hot swappable hard drives: six hard drives in the drive bays,
plus one in the flex bay.
CAUTION
To allow proper airflow and server cooling, all drive bays must contain either
a carrier with a hard drive installed or a carrier with an air baffle installed.
1. If present, remove the front bezel.
2. If the drive carrier is installed in the drive bay, remove it.
3. Remove the air baffle (Figure 25, A) from the drive carrier by removing the four screws (B)
from the slide track (C).
4. Store the air baffle for future reinstallation in the event you must operate your server without a
drive in one of the bays.
38
A
C
Figure 25. Removing an Air Baffle from a Drive Carrier
B
OM14099
Intel SR2300 Chassis Subassembly Product Guide