6. With a 1/4-inch nut driver, remove the standoffs.
7. With a Phillips* screwdriver, secure the four screws previously removed into the
holes vacated by the standoffs.
8. Reinstall the top cover. For instructions, see
on page
9. Reinstall the server compute blade in the server system. For instructions, see
"Installing a Compute Module into the Server System" on page
38
1
I/ O
2
1
2
ID
Figure 41. Removing Standoffs
10.
"Replacing and Closing the Top Cover"
8.
Intel® Compute Module MFS5000SI User Guide
AF002457