Related Manuals for Intel NetStructure MPRTM4808
Summary of Contents for Intel NetStructure MPRTM4808
- Page 1 ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide December 2004 Order Number: 301370-002 Download from Www.Somanuals.com. All Manuals Search And Download.
- Page 2 Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Intel may make changes to specifications and product descriptions at any time, without notice.
-
Page 3: Table Of Contents
4.5.1 Safety Precautions....................28 AC and/or DC Power Safety Warning (AC and/or DC Powered Units) ......29 Rack Mount Enclosure Safety .................... 29 ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide Download from Www.Somanuals.com. All Manuals Search And Download. - Page 4 PMC 1 Connector Pinout......................15 PMC 2 Connector Pinout......................16 10 Location of Switches........................17 ® 11 Connecting Intel NetStructure™ MPRTM4808 Rear Transition Board to Backplane....18 12 J3 Connector Pinout (Rows A-C) ....................19 13 J3 Connector Pinout (Rows D and E)..................20 14 J5 Connector Pinout (Rows A-C) ....................
- Page 5 Contents Revision History Date Revision Description May 2004 Initial release of this manual December 2004 Modified Serial Connectors information ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide Download from Www.Somanuals.com. All Manuals Search And Download.
-
Page 6: Using This Guide
Intelligent Platform Management Interface SELV Safety Extra Low Voltages Other Sources of Information ® For further information, refer to the Intel NetStructure™ MPRTM4808 Rear Transition Board User’s Manual, Order number 301070. ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide... -
Page 7: Operating Safety
Electromagnetic Compatibility (EMC) The Intel MPRTM4808 board has been tested in a standard system and found to comply with the limits for a Class A digital device in this system, pursuant to part 15 of the FCC Rules respectively EN 55022 Class A. -
Page 8: Installation
EIDE interface on the RTB. If the secondary EIDE interface on the Intel MPRTM4808 board is connected to an external device, data may get lost. Therefore, always save data on disk before installing or removing the baseboard under hot-swap conditions. -
Page 9: Rj-45 Connector
Operating Safety RJ-45 Connector The Intel MPRTM4808 board provides several RJ-45 connectors that commonly serve as different interfaces (RS-485, twisted-pair Ethernet, and telephone). Connecting different interfaces (e.g., Ethernet and RS-485) may damage the board. Therefore, make sure that you only connect matching interfaces. -
Page 10: Installation
• Installation Guide If delivered as part of a system design, the Intel MPRTM4808 board is already installed in the system. For information on system connectors available for user-defined system configuration, refer to the respective system’s guide. The cabling of all other connectors of the Intel MPRTM4808 board must remain as configured at system delivery. -
Page 11: Standard Compliances
FCC Part 15 Class A ANSI/IPC-A-610 Rev.C Class 2 ANSI/IPC-7711 Manufacturing standards ANSI/IPC-7721 ANSI-J-001...003 On-Board Connectors The Intel MPRTM4808 board provides the following on-board connectors: Figure 2. On-Board Connectors PMC 1 I/O PMC 2 I/O Compact Flash Disk Floppy Disk IPMB1 ®... -
Page 12: Secondary Eide Interface
EIDE interface on the Intel MPRTM4808 board. • If the secondary EIDE interface on the Intel MPRTM4808 board is connected to an external device, the board is hot-swappable, but data may get lost. Therefore, always save data on disk before installing or removing the baseboard under hot-swap conditions. -
Page 13: Location Of Compactflash Slot
Figure 5. Inserting a CompactFlash Disk into Socket 5. Turn on CPU power. ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide Download from Www.Somanuals.com. All Manuals Search And Download. -
Page 14: Floppy Disk Drive
3.3.2 Floppy Disk Drive Note: The board is not hot-swappable if a floppy disk drive is connected to the Intel MPRTM4808 board. The floppy disk drive connector is a 34-pin 2.54-mm pin-pitch connector. The following connector pinout shows how the pins are assigned. -
Page 15: Pmc I/O Signals
The I/O signals of PMC Slots 1 and 2 of the CPU board are routed to two 64-pin connectors. Figure 8 Figure 9 show the pinouts. Figure 8. PMC 1 Connector Pinout ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide Download from Www.Somanuals.com. All Manuals Search And Download. -
Page 16: Pmc 2 Connector Pinout
Installation Figure 9. PMC 2 Connector Pinout ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide Download from Www.Somanuals.com. All Manuals Search And Download. -
Page 17: Switch Settings
Installation Switch Settings Caution: The Intel MPRTM4808 board provides two on-board switches and one FP reset switch. The switches must be set to OFF to avoid damage to attached PMC modules. Figure 10. Location of Switches Table 3. Switch Settings... -
Page 18: Installation Procedure
OFF (default position) 5. Connect interface cables to on-board connectors. 6. Insert the Intel MPRTM4808 board carefully from rear into same slot as the CPU board, making sure not to bend any pins. ®... -
Page 19: Removal Procedure
1. Check all installed boards for steps to perform before turning off power. 2. Turn off system power. 3. Unfasten screws of front panel until Intel MPRTM4808 board is detached from rack frame. 4. Unlock handles by pressing on red handle buttons. -
Page 20: J3 Connector Pinout (Rows D And E)
Installation Figure 13. J3 Connector Pinout (Rows D and E) Figure 14. J5 Connector Pinout (Rows A-C) ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide Download from Www.Somanuals.com. All Manuals Search And Download. -
Page 21: J5 Connector Pinout (Rows D And E)
Installation Figure 15. J5 Connector Pinout (Rows D and E) ® Intel NetStructure™ MPRTM4808 Rear Transition Board Installation Guide Download from Www.Somanuals.com. All Manuals Search And Download. -
Page 22: Front Panel Connectors And Controls
Figure 16. Front Panel Connectors and Controls Caution: The Intel MPRTM4808 board provides several RJ-45 connectors that commonly serve as different interfaces (RS-485, twisted pair Ethernet and telephone). Connecting different interfaces (e.g. Ethernet and RS-485) may damage the board. Therefore, make sure that you only connect matching interfaces. -
Page 23: Icmb Connector
The ICMB connector can be used to attach the Intel NetStructure MPCBL5525 System Master Board via the Intel MPRTM4808 board to other systems based on the IPMI. To monitor the overall system, the chassis can be connected via the Intel MPRTM4808 boards. The IPMI signals are routed from the CPU via the backplane to the Intel MPRTM4808 board and are then available on the ICMB connector. -
Page 24: Serial Connectors
Two serial devices can be connected via the two COM connectors, and one USB device (e.g., USB keyboard, USB mouse) can be connected via the USB connector. Note: The two COM ports are only available if the Intel MPRTM4808 board is used together with the Intel NetStructure MPCBL5525 System Master Board. -
Page 25: Reset Key
3.7.4 Reset Key The Intel MPRTM4808 board provides a reset key on the front panel to execute a reset on the Intel NetStructure MPCBL5525 System Master Board in systems where the back can be accessed more easily than the front. The way the reset is performed can be determined by adapting the settings in the Reset Control registers of the CPU board or by changing the settings of the switches on the CPU board. -
Page 26: Agency Approvals
The Intel NetStructure™ MPRTM4808 Rear Transition Board meets intent of Directive 89/336/ EEC for Electromagnetic Compatibility and Low-Voltage Directive 73/23/EEC for Product Safety. The Intel MPRTM4808 board has been designed for NEBS/ETSI compliance. Safety Certifications UL/cUL 60950 Safety for Information Technology Equipment... -
Page 27: En 55024 Immunity
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Caution: If you make any modification to the equipment not expressly approved by Intel, you could void your authority to operate the equipment. 4.4.2 Industry Canada (Canada) Cet appareil numérique respecte les limites bruits radioélectriques applicables aux appareils... -
Page 28: Product Safety Information
When the battery is replaced, the same type or an equivalent type recommended by the manufacturer must be used. Used batteries must be disposed of according to the manufacturer's instructions. Return the unit to Intel for battery service. ®... -
Page 29: Ac And/Or Dc Power Safety Warning (Ac And/Or Dc Powered Units)
Disconnect all power sources and external connections/cables prior to installing or removing your system from a rack frame. Prior to mounting, Intel recommends you remove all hot-swappable equipment for optimum weight reduction. Be sure to mount your system in a way that ensures even loading of the rack. -
Page 30: Warranty Information
If the product is found to be otherwise defective, Intel, at its option, will replace or repair the product at no charge except as set forth below, provided that you deliver the product along with a return material authorization (RMA) number (see below) either to the company from whom you purchased it or to Intel. - Page 31 Office Hours: Monday - Friday 0700-1700 MST Winter / PST Summer 5.1.1.2 For EMEA Return Material Authorization (RMA) e-mail address - emea.fs@intel.com Direct Return Authorization (DRA) for repair requests e-mail address: emea.fs@intel.com Intel Business Link (IBL): http://intel.com/ibl Telephone No.: 00 44 1793 403063 Fax No.: 00 44 1793 403109 Office Hours: Monday - Friday 0900-1700 UK time 5.1.1.3...
- Page 32 If the Customer Support Group verifies that the product is defective, they will have the Direct Return Authorization/Return Material Authorization Department issue you a DRA/RMA number to place on the outer package of the product. Intel cannot accept any product without a DRA/RMA number on the package. Limitation of Liability and Remedies...
-
Page 33: Customer Support
Sales Assistance If you have a sales question, please contact your local Intel NetStructure sales representative or the regional sales office for your area. Address, telephone and fax numbers, and additional information is available at Intel's website, located at http://www.intel.com/network/csp/sales/... - Page 34 Free Manuals Download Website h p://myh66.com h p://usermanuals.us h p://www.somanuals.com h p://www.4manuals.cc h p://www.manual-lib.com h p://www.404manual.com h p://www.luxmanual.com h p://aubethermostatmanual.com Golf course search by state h p://golfingnear.com Email search by domain h p://emailbydomain.com Auto manuals search h p://auto.somanuals.com TV manuals search h p://tv.somanuals.com...