Diagnosing Cd-Rom Drive Problems - Epson ActionPC 2000 Read This First Manual

The contents of the AUTOEXEC.BAT and CONFIG.SYS files
are listed below. (The order of the commands in your files may
be slightly different from the order shown here.)
AUTOEXEC.BAT
@ECHO OFF
C:\DOS\MSCDEX.EXE /D:MSCD001 /M:10
SET SOUND=C:\MOZART
SET BLASTER=A220 15 D1T4
C:\ MOZART\MZTVOL.EXE
C:\DOS\SMARTDRV.EXE/X
PROMPT $p$g
PATH C:\WINDOWS:C:\DOS
PATH %PATH%;C:\MOUSE
SET LMOUSE=C:\MOUSE
C:\MOUSE\MOUSE
SET TEMP=C:\DOS
WIN
CONFIG.SYS
LASTDRIVE=E
DEVICE=C:\MOZART\MZTINIT.SYS /A220 /15 /D1 /M /CA340 /Cl10 /G /V7
DEVICE=C:\DOS\SETVER.EXE
DEVICE=C:\DOS\HIMEM.SYS
DOS=HIGH
FILES=30
STACKS=9,256
DEVICE=C:\DEV\MTMCDAS.SYS/D:MSCD001 /P:340 /A:0

Diagnosing CD-ROM Drive Problems

If you see an error message when you try to access your
CD-ROM drive, try the following:
have tried to access the CD too quickly; wait 10 seconds
after loading the CD in the drive before you access it. (If
you still see Drive not ready, select Retry.)
Read This First 23