Connecting The Speakers - Epson ActionPC 2000 Read This First Manual

Note
To use any of the CD programs, you must place its CD in the
CD-ROM drive and wait at least 10 seconds before you
access the program.
If you own any music CDs, see the CD-ROM drive manual that
came with your computer for instructions on playing them on
your system. You can also use the Sound Impression program
on your computer to play music on CD while you are using
your computer. See your sound card manual and the Sound
Impression on-line help information for instructions.

Connecting the Speakers

The speakers that come with your multimedia system can be
used as unamplified or amplified speakers. If you connect the
speakers to your computer without installing batteries they are
unamplified. If you install batteries or power the speakers
using a DC 6-Volt input jack, they are amplified speakers.
You connect the speakers to either the SPK or OUT port on your
computer's sound card, depending on whether you are using
amplified or unamplified speakers. Follow the guidelines in the
table below to determine the port you should use:
Speakertype
EPSON speakerswithout batteries (unamplified)
EPSON speakerswith batteries or connected to
DC 6-Volt input jack (amplified)
Other manufacturer's speakers (unamplified)
Other manufacturer's speakers (amplified)
Port
SPK
SPK
Read This First 11