Adjusting The Sound; Testing Your Multimedia System - Epson ActionPC 2000 Read This First Manual

Adjusting the Sound

To adjust the speaker's volume and other operating
characteristics, select the Sound Impression or Mozart Mixer
program icons in Windows. Follow the instructions in the
on-line help program to select the sound you prefer.
If you are not using Windows when you need to adjust the
speaker volume, you can use the following keyboard
commands:
Ctrl Alt U

Testing Your Multimedia System

To test your system as it was configured at the factory, connect
only your monitor, keyboard, and mouse as described in your
computer User's Guide. Also connect your speakers, as
described in the previous sections. Then follow the instructions
in your computer User's Guide for turning on your system.
After your computer performs its power-on diagnostic tests, it
loads your operating system (MS-DOS) and Windows. Fill out
the Windows registration screen and select the printer you
have connected. (See your Windows manual or on-line help for
instructions.)
After a few moments, the computer starts FocalPoint. Follow
these steps to test your system :
1. Follow the instructions in your CD-ROM drive manual to
load one of the CDs that came with your system in the
CD-ROM drive.
14 Read This First
(to increase the volume)
(to decrease it)
(to mute it).