In order to continue using your system while you investigate
the problem, follow these steps:
1. Turn off the system.
2. Insert a bootable diskette and turn on your system.
3.
After it boots, log onto the root directory of your hard
disk.
4. Edit the AUTOEXEC.BAT and CONFIG.SYS files (as
described in step 1 on page 17) and add
to the beginning of any command lines that affect your
sound card and CD-ROM drive. (Or restore your
original system files as described in the next section.)
5. Remove the bootable diskette.
6. Reboot your computer from the hard disk drive.
Contact your Authorized EPSON Servicer or the EPSON
Connection to report the problem with your sound card or
CD-ROM drive; see page 5 for instructions.
If none of the solutions in this entire section work, follow the
instructions in the next section to restore your original system
files and then reinstall your optional equipment or software.
(remark)
REM
First
21
Read This