Testing Your Multimedia System - Epson ActionPC 2000 Read This First Manual

Testing Your Multimedia System

To test your System as it was configured at the factory, connect
only your monitor, keyboard, and mouse as described in your
computer User's Guide. Also connect your speakers, as
described in the previous sections. Then follow the instructions
in your computer User's Guide for turning on your system.
After your computer performs its power-on diagnostic tests, it
loads your operating system (MS-DOS) and Windows. Fill out
the Windows registration screen and select the printer you
have connected. (See your Windows manual or on-line help for
instructions.)
After a few moments, the computer starts FocalPoint. Follow
these steps to test your system:
1. Follow the instructions in your CD-ROM drive manual to
load one of the CDs that came with your system in the
CD-ROM drive.
2. In FocalPoint, move the cursor to the Software button (on the
top left side of the screen) or the Games button (on the
bottom left side) to locate the program for which you
loaded the CD. Click the left mouse button once.
Move the cursor to the program icon for which you loaded
3.
the CD and click the left mouse button once.
4. Follow the instructions in the program documentation to test
some of the operations of the program. Be sure the
program's video and audio functions operate correctly.
5. Exit the program and return to FocalPoint.
Select the Exit button (the door icon on the right side of the
6.
FocalPoint screen) to exit to Windows Program Manager.