Running Berenstain Bears From Dos - Epson ActionPC 2000 Read This First Manual

7. Select the Exit Windows command from the File menu to exit
Windows.
8. Remove the CD from the CD-ROM drive and turn off your
system.
When you finish testing your system and are sure it is working
correctly, see your computer User's Guide for instructions on
installing your optional equipment. Also read the instructions
there for running the Setup program and performing general
system operations, such as resetting your system and using a
password.
If you have any trouble with your system, check the
troubleshooting information beginning on page 15.

Running Berenstain Bears from DOS

The program Compton's Berenstain Rears Learning at Home,
Volume 1 is an MS-DOS-based program that cannot be run
from a Windows icon like your other multimedia programs. To
run Berenstain Rears, you must exit Windows (if you are
currently using it) and enter a command at the MS-DOS
prompt.
Note
If you purchased any additional MS-DOS-based game
programs, you must also run them from the MS-DOS
prompt as described here. See the program documentation
for information about the directory in which the program is
stored and the command you should use to start it.
14 Read This First