Removing The Palmrest Cover With Touchpad - Compaq 1600R - ProLiant - 128 MB RAM Maintenance And Service Manual

Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin
Specifications
Removal Sequence
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Presario 1600 Series
Product Description
Battery Operations
Troubleshooting
Removal Sequence
Removing the Palmrest Cover with
TouchPad
It is not necessary to remove the display panel
NOTE:
assembly to access the interior components of
the computer.
To remove the palmrest cover with TouchPad,
complete the following steps:
1. Prepare the computer for
2. Close the display assembly and turn the
computer upside down.
3. Remove four screws from underneath the
computer and 1 screw from the right-side of
the computer.
Next Step
Parts Catalog
Pin Assignments
MSG Index
disassembly.