Removing The Palmrest Cover With Touchpad - Compaq 12XL125 - Presario - K6-2 533 MHz Maintenance & Service Manual

Removing the Palmrest Cover with TouchPad

The palmrest cover with TouchPad is the first component that must be removed to gain
access to the interior components of the Notebook.
Note: It is not necessary to remove the display panel assembly to access the interior
components of the Notebook.
To remove the palmrest cover with TouchPad, complete the following steps:
1. Prepare the computer for disassembly
2. Close the display and turn the computer upside down.
3. Remove three screws from the underside of the Notebook and one screw from the
right-side of the computer.
Continued on next page.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
S G 1200XL S
ERVICE UIDE
(pg 10).
ERIES
R S 13
EMOVAL EQUENCE