Removing The Battery Charger Board - Compaq 1600R - ProLiant - 128 MB RAM Maintenance And Service Manual

Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin
Specifications
Removal Sequence
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Presario 1600 Series
Product Description
Battery Operations
Troubleshooting
Removal Sequence

Removing the Battery Charger Board

(Voltage Converter Board)
To remove the battery charger board, complete the
following:
1. Prepare the computer for
2. Remove the Palmrest Cover with
3. Remove the
4. Remove the
5. Remove the Status/Internet Zone
6. Remove the Internet Button
7. Remove the display panel
8. Remove the hard
9. Remove the upper CPU
10. Remove two screws from the battery charger
board, unplug the board from the connector on
the system board, and lift battery charger
board out of the chassis.
To replace the battery charger board, reverse the
previous procedures.
When replacing the battery
charger board, ensure that the
NOTE:
pins are aligned with the
connector on the system board.
disassembly.
keyboard.
Heatspreader.
Assembly.
drive.
cover.
Parts Catalog
Pin Assignments
MSG Index
TouchPad.
Cover.
board.