Removing The Palmrest Cover With Touch Pad - Compaq Presario 1600 - Notebook PC Maintenance And Service Manual

Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface
Removal & Replacement Procedures

Removing The Palmrest Cover with Touch Pad

The palmrest cover with touch pad is the first component to be removed to
gain access to any of the interior components of the computer.
NOTE: It is not necessary to remove the display panel assembly to access
the interior components of the computer.
Removing
the Battery
Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface
Board
Hard Drive
Battery
Charger
Board
CD Drive
Display
Removing the Screws from the Palmrest Cover
Assembly
with Touch Pad
Plastic
Subpanel
Assembly
CD Drive
Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
| Home | Product Description
| Specifications
| Troubleshooting |
| Connector Pin Assignments
Illustrated Parts Catalog
| Battery Pack
To remove
the palmrest
cover with
touch pad,
complete the
following
steps:
1. Prepare
the
Computer
for
Disassembly.
2. Close the
computer
and turn the
computer
upside
down.
3. Remove
the three
screws from
the bottom
of the
computer as
shown.
Next