Removing The Hard Drive - Compaq 1600R - ProLiant - 128 MB RAM Maintenance And Service Manual

Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin
Specifications
Removal Sequence
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Presario 1600 Series
Product Description
Battery Operations
Troubleshooting
Removal Sequence

Removing the Hard Drive

Illustrations may show parts removed that
are not part of this procedure. It is
NOTE:
necessary to remove only the parts listed in
the written procedure.
To remove the hard drive, complete the following steps:
1. Prepare the computer for
2. Remove the Palmrest Cover with
3. Remove four screws from the hard drive mounting bracket,
disconnect the hard drive data cable and lift out the hard
drive with drive mounting brackets attached.
Next Step
Parts Catalog
Pin Assignments
disassembly.
TouchPad.
MSG Index