Removing The Heatspreader - Compaq 1600R - ProLiant - 128 MB RAM Maintenance And Service Manual

Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin
Specifications
Removal Sequence
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Presario 1600 Series
Product Description
Battery Operations
Troubleshooting
Removal Sequence

Removing the Heatspreader

To remove the Heatspreader, complete the following steps:
1. Prepare the computer for
2. Remove the Palmrest Cover with
3. Remove the
4. Remove three screws from the Heatspreader and lift
out of the chassis.
If the thermal pads on the
Heatspreader are missing or damaged,
NOTE:
a new Heatspreader should be
installed.
To replace the Heatspreader, reverse the previous
procedures.
IMPORTANT:
WARNING: To prevent damage, do
not use excessive force when replacing
the screws.
disassembly.
keyboard.
Before installing the new
Heatspreader, remove the
plastic covering from the
thermal pads.
Parts Catalog
Pin Assignments
MSG Index
TouchPad.