Table of Contents
Advertisement
Specifications
7 General
Model name
DT-V9L3DY
Type
Multi format LCD monitor
Screen size
Type 9 wide format
Aspect ratio
15:9
LCD panel
9˝ wide, IPS-Pro
Width: 195 mm (7 5/8˝)
Effective screen size
Height: 117 mm (4 9/16˝)
Number of pixels displayed
800 x 480
Number of colors displayed
16.77 million
Viewing angle (TYP.)
170° (Horizontally), 170° (Vertically)
Brightness
350 cd/m
2
Contrast ratio (TYP.)
400:1
Compliant video signal format ☞ "Available signals" on page 9
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
Format
SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output
Internal speaker: 1.0 W
Operating temperature: 0°C – 40°C (32°F – 104°F)
Operating conditions
Operating humidity: 20 % – 80 % (non-condensing)
* Slightly variable depending on ambient conditions for installation.
AC 120 V, 50 Hz/60 Hz
Power requirements
DC 12 – 17 V
0.35 A (AC 120 V)
Rated current
1.7 A (DC 12 – 17 V)
Width:
222.4 mm (8 7/8˝)
Height:
218 mm (8 5/8˝) (at the higher position),
181 mm (7 1/4˝) (at the lower position),
External dimensions
176 mm (7˝) (without stand)
(excluding protruding parts)
Depth:
185 mm (7 3/8˝) (at the higher position),
202 mm (8˝) (at the lower position),
116 mm (4 5/8˝) (without stand)
3.6 kg (7.9 lbs) (with the stand)
Weight
2.7 kg (5.9 lbs) (without the stand)
AC power cord x 1, Power cord holder x 1, Screw x 2 (for power cord holder),
Accessories
Protective filter x 1, Screw (for protective filter) x 4
Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
7 Input/output terminals
VBS/Y
Composite signal/analog component (Y) signal input/output:
VIDEO/COMPONENT
(IN/OUT)
P
, P
B
R
Analog component (P
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO signals):
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
Digital signal output (compatible with EMBEDDED AUDIO signals):
(SWITCHED OUT)
AUDIO (IN)
Analog audio signal input:
AUDIO (MONITOR OUT)
Analog audio signal output:
EARPHONE
Monaural mini jack (3.5 mm in diameter) x 1
REMOTE (MAKE/
☞ "Using the MAKE/TRIGGER system" on page 16
TRIGGER)
☞ "Using the RS-232C system" on page 17
REMOTE (RS-232C)
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,
and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and
may be the trademarks or registered trademarks of their respective companies.
1 line, BNC connector x 2
1 V(p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination)
, P
) signal input:
B
R
1 line, BNC connector x 2
0.7 V(p-p), 75 Ω
auto detection, 1 line, BNC connector x 1
1 line switched out, BNC connector x 1
1 line, RCA connector x 1,
500 mV (rms), high impedance
1 line, RCA connector x 2,
500 mV (rms)
21
Advertisement
Table of Contents
