JVC DT-V9L3DY - Broadcast Studio Monitor Instructions Manual page 13

Multi format lcd monitor
Hide thumbs Also See for DT-V9L3DY - Broadcast Studio Monitor:
Table of Contents

Advertisement

Operation guide
Shows the buttons for each
operation.
• The menu automatically disappears in about 30 seconds after the previous operation.
• Some items may not appear on the menu depending on the input or the input signal.
• The items controlled by the MAKE system do not appear on the menu.
NOTE
Example of the wave form monitor
Ex.: When "MARKING" is set to "ON" and "LEVEL" is set to "080"
White
Red
Video signal
Start
End
• The wave which goes over the value set on "LEVEL"
is indicated in red.
WAVE FORM SETTING
Settings for the wave form monitor
Item
To do
POSITION
Select the position of the wave form monitor.
GAIN
Adjust the gain level for the incoming wave form
data.
OVER LEVEL
Select the over level for the incoming luminance
signals.
MARKING
Activates/deactivates the function to change the
color of a wave form when the signal exceeds the
limit specified on "LEVEL" (☞ below).
LEVEL
Adjust the lower limit for the luminance signal
AUTO OFF
Activates/deactivates the function to make the
wave form monitor indication go off automatically
15 minutes after displaying it.
SYNC FUNCTION
Settings for the synchronization with signals
Item
To do
NO SYNC ACTION
Select the screen status when no signal is
coming in.
DELAY TIME
Select the period until the screen status
changes as selected in "NO SYNC ACTION"
after signals stop coming in.
• When setting "NO SYNC ACTION" to "GRAY B.," the screen color changes to gray and the power consumption
of the back light is saved by half.
Selecting "P.SAVE" (power save mode) saves more power consumption by turning off the back light.
Setting value: OFF, CC1, CC2
CLOSED CAPTION
Selects the type of closed caption for analog composite signals (NTSC and B/W60 only).
• Regardless of the setting, the closed caption is not displayed when the wave form monitor is displayed.
Setting value
1 (lower right), 2 (lower left), 3 (upper left),
4 (upper right)
–10 – +10
☞ "NOTE"
OFF, ON
070 –109
ON, OFF
Setting value
OFF,
P.SAVE (power save mode),
GRAY B. (gray screen)
30sec., 5min., 15min.
13

Advertisement

Table of Contents
loading

Table of Contents