Setting A Schedule To Block Or Allow Specific Traffic - NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual

6. In the Incoming (Response) Port Range fields:
a. Enter the Start Port range (1 - 65534).
b. Enter the End Port range (1 - 65534).
7. Click Add. The port triggering rule will be added to the Port Triggering Rules table.
To check the status of the port triggering rules, click the Status option arrow to the right of the tab
on the Port Triggering screen. The following data is displayed:
• Rule – The name of the port triggering rule.
• LAN IP Address – The IP address of the PC currently using this rule.
• Open Ports – The incoming ports associated with this rule. Incoming traffic using these ports
will be sent to the LAN IP address above.
• Time Remaining – The time remaining before this rule is released, and thus available for other
PCs. The timer is reset whenever incoming or outgoing traffic is received.

Setting a Schedule to Block or Allow Specific Traffic

Schedules define the timeframes under which firewall rules may be applied.
Figure 4-14
Firewall Protection and Content Filtering
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
1.1 November, 2009
4-29