NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual page 28

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
2. Click Auto Detect at the bottom of the menu. Auto Detect will probe the WAN port for a
range of connection methods and suggest one that your ISP appears to support.
Figure 2-4
a. If Auto Detect is successful, a status bar at the top of the menu will display the results:.
b. If Auto Detect senses a connection method that requires input from you, it will prompt you
for the information. All methods with their required settings are detailed in the following
table.
Table 2-1. Internet connection methods
Connection Method
DHCP (Dynamic IP)
PPPoE
PPTP
Fixed (Static) IP
c. If Auto Detect does not find a connection, you will be prompted to (1) check the physical
connection between your VPN firewall and the cable or DSL line, or to (2) check your
VPN firewall's MAC address (For more information, see
on page 2-11
2-6
Data Required
No data is required.
Login (Username, Password);
Account Name, Domain Name (sometimes required).
Login (Username, Password),
Local IP address, and PPTP Server IP address;
Account Name (sometimes required).
Static IP address, Subnet, and Gateway IP; DNS Server IP addresses.
and "Troubleshooting the ISP Connection" on page
1.1 November, 2009
"Configuring the WAN Mode"
8-4).
Connecting the FVS318G to the Internet