NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual page 106

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
2. Click the RADIUS Client tab. The RADIUS Client screen is displayed.
Figure 5-19
3. To activate (enable) the Primary RADIUS server, click the Yes radio button. The primary
server options become active.
4. Configure the following entries:
• Primary RADIUS Server IP address. The IP address of the RADIUS server.
• Secret Phrase. Transactions between the client and the RADIUS server are authenticated
using a shared secret phrase, so the same Secret Phrase must be configured on both client
and server.
• Primary Server NAS Identifier (Network Access Server). This Identifier MUST be
present in a RADIUS request. Ensure that NAS Identifier is configured identically on both
client and server.
5-20 Virtual Private Networking Using IPsec
1.1 November, 2009