Creating A Lan Wan Inbound Services Rule - NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
1. Click Add under the Outbound Services Table. The Add LAN WAN Outbound Service
screen is displayed..
Figure 4-2
2. Configure the parameters based on the descriptions in
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Outbound Services table.

Creating a LAN WAN Inbound Services Rule

This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not
defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that
allowing inbound services opens holes in your firewall. Only enable those ports that are necessary
for your network.
To create a new inbound service rule in the LAN WAN Rules tab:
1. Click Add under the Inbound Services Table. The Add LAN WAN Inbound Service screen
is displayed.
4-10
Table 4-1 on page
Firewall Protection and Content Filtering
1.1 November, 2009
4-3.