NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual page 32

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
• Server IP Address. IP address of the PPTP server.
7. Review the Internet (IP) Address options.
Figure 2-9
These options are inactive if BigPond Cable is selected.
8. If your ISP has assigned a fixed (static) IP address, select Use Static IP Address, and
configure the following fields:
• IP Address. Enter the Static IP address assigned to you, that identifies the VPN firewall to
your ISP.
• Subnet Mask. Enter the mask provided by the ISP or your network administrator.
• Gateway IP Address. Enter the IP address of the ISP's gateway, provided by the ISP or
your network administrator.
9. If your ISP has not assigned a static IP address, click Get dynamically from ISP. The text
fields will be inactivated.
The ISP will automatically assign an IP address to the VPN firewall using DHCP network
protocol.
2-10 Connecting the FVS318G to the Internet
1.1 November, 2009