Enabling Remote Management Access - NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual

Enabling Remote Management Access

Using the Remote Management page, you can allow an administrator on the Internet to configure,
upgrade, and check the status of your VPN firewall. You must be logged in locally to enable
remote management (see
Note: Be sure to change the default configuration password of the firewall to a very
secure password. The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both upper and lower case), numbers,
and symbols. Your password can be up to 30 characters. See
and Administrator Settings" on page 7-8
To configure your firewall for Remote Management:
1. Select Administration > Remote Management from the main menu The Remote
Management screen is displayed.
7-10
"Logging into the VPN Firewall Router Router" on page
1.1 November, 2009
"Changing Passwords
for the procedure on how to do this.
Router and Network Management
2-2).