Spark Plug - DAELIM S-FIVE Manual

SPARK PLUG

If electrode is stained or clearance is not
right, satisfactory spark is not produced.
Clean and make adjustment.
Loosen the special screw and remove
the plug maintenance cover.
Remove the spark plug cap.
Clean around the plug.
Using a plug wrench, remove the plug.
40
Clean plug with plug cleaner.
Check electrode for wear and corro-
sion.
Check the plug gap using a feeler gauge.
PLUG GAP : 0.6~0.7mm
Tighten with hands until the plug
washer touches cylinder head.
STANDARD PLUG: B8HSA
If new plug is installed, turn 1/2 and
tighten using a plug wrench.
If plug is reused, turn 1/3~1/4 and
tighten.
Install in the reverse order of removal.
CAUTION
If plug of different maker or different
heat value is used, it causes
unsatisfactory engine starting,
inadequate engine revolution and
output deterioration.
The spark plug must be securely
tightened. An improperly tightened
plug can become very hot and
possibly damage the engine.