Table of Contents
Advertisement
SIMPLE MAINTENANCE
The following is an explanation of correct
inspection methods, cleaning and parts
replacing. Please always refer to this
section when wanting to inspect or repair
your vehicle.
CAUTION
Always observe safety rules when
performing maintenance on the
vehicle.
Choose a flat surface and make
sure the main stand is in a secure
down position.
Use correct tools.
Conduct engine maintenance with
the engine key out of the ignition.
Be careful around the engine and
muffler when performing mainte-
nance as these areas can become
extremely hot.
After self maintenance, the waste
material must be packed in the
specified container and entrusted
disposal to the authorized disposal
company.
BRAKE LEVER ADJUSTMENT
Brake lever free play is adjusted by
rotating the adjuster of the brake arm.
After adjustment, check the brake lever to
ensure that the clearance is not above or
under the prescribed amount.
BRAKE LEVER FREE PLAY : 10~20mm
CAUTION
After adjusting the brake, make
sure that " " part of the adjuster
contacts the pin as in the drawing
below. Brake clearance can change
when driving if this is not done.
It is not necessary to adjust the
front brake.
If the brake lever free play is
significantly decreased, check the
front/rear brake pads and the lining.
REAR BRAKE
33
Hide quick links:
Advertisement
Table of Contents
