Positions Of Turning - DAELIM S-FIVE Manual

3 POSITIONS OF TURNING

The basic principle of turn is balancing using combined force of
the centrifugal force and the gravity.
All 3 positions require straightening the head and keeping the
eyes horizontally.
< LEAN-WITH >
This is a turning position with motor cycle and driver in a line.
This position is the most natural and exact, so driver must learn
it thoroughly.
< LEAN-IN >
This is a turning position with driver leaned inside more than
motor cycle. This position is adequate to drive on the rained or
slippy road because it has best road holding.
However, special attention is required because front visual field
is poor when driver leans inside more than motor cycle.
55