Hoisting - Dodge 2004 DR Ram SRT-10 Owner's Manual

Disc Type Nut Stud Size Torque
Wheels
Cone 1/2-20
To Stow The Flat Or Spare
Turn the wheel so that the valve stem is down. Slide the
wheel retainer through the center of the wheel and
position it properly across the wheel opening.
For convenience in checking the spare tire inflation, stow
with the valve stem toward the rear of the vehicle.
Attach the wheel wrench to the extension tube. Rotate the
winch mechanism until the wheel is drawn into place
against the underside of the vehicle. Continue to rotate
until you feel the winch mechanism slip or click 3 or 4
times. It cannot be overtightened. Push against the tire
several times to be sure it is firmly in place.

HOISTING

Torque
A conventional floor jack may be used at the jacking
Ft. Lbs. Newton
locations, refer to the graphics that show jacking loca-
Meters
tions. However, a floor jack or frame hoist must never be
90-110 125-150
used on any other parts or the underbody.
WHAT TO DO IN EMERGENCIES 207
CAUTION!
Never use a floor jack directly under the differential
housing of a loaded truck or damage to your vehicle
may result.
6