Hoisting; Tires; Tire Safety Information - Dodge RAM CHASSIS CAB2018 User Manual

HOISTING

A conventional floor jack may be used at the
jacking locations. Refer to the graphics that
show jacking locations. However, a floor jack
or frame hoist must never be used on any
other parts of the underbody.
CAUTION!
Never use a floor jack directly under the
differential housing of a loaded truck or
damage to your vehicle may result.

TIRES

Tire Safety Information

Tire safety information will cover aspects of
the following information: Tire Markings, Tire
Identification Numbers, Tire Terminology and
Definitions, Tire Pressures, and Tire Loading.
Tire Markings
Tire Markings
1 — U.S. DOT 4 — Maximum
Safety Load
Standards Code
(TIN)
2 — Size 5 — Maximum
Designation Pressure
3 — Service 6 — Treadwear,
Description Traction and
Temperature
Grades
NOTE:
• P (Passenger) — Metric tire sizing is based
on U.S. design standards. P-Metric tires
have the letter "P" molded into the sidewall
preceding the size designation. Example:
P215/65R15 95H.
• European — Metric tire sizing is based on
European design standards. Tires designed
to this standard have the tire size molded
into the sidewall beginning with the section
width. The letter "P" is absent from this tire
size designation. Example:
65R15 96H.
• LT (Light Truck) — Metric tire sizing is
based on U.S. design standards. The size
designation for LT-Metric tires is the same
as for P-Metric tires except for the letters
"LT" that are molded into the sidewall pre-
ceding the size designation. Example:
LT235/85R16.
• Temporary spare tires are designed for tem-
porary emergency use only. Temporary high
pressure compact spare tires have the letter
"T" or "S" molded into the sidewall preced-
ing the size designation. Example: T145/
80D18 103M.
215/
191