Advanced Phone Connectivity - Dodge 2004 DR Ram SRT-10 Owner's Manual

Three-Way Calling
To initiate three-way calling, press the 'Voice Recogni-
tion' button while a call is in progress and make a second
phone call. When the second call is established, press the
'Phone' button until you hear a double beep indicating
that the two calls have been joined into one conference
call.
Call Termination
To end a call in progress, press the 'Phone' button. All
calls in progress will be terminated.
Phone Redial
• Press the 'Phone' button to begin.
• After the Ready prompt, say Redial .
• The UConnect™ system will call the last number that
was dialed on your cellular phone. This may not be the
last number dialed by your UConnect™ system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75

Advanced Phone Connectivity

Transferring an Active Call between the
UConnect™ System and Your Cellular Phone
The UConnect™ system allows ongoing calls to be trans-
ferred to your cellular phone or to the UConnect™
system without terminating the call. To transfer an ongo-
ing call from your cellular phone to the UConnect™
system or vice versa, press the 'Voice Recognition' button
and say Transfer Call .
Delete Paired Cellular Phones
• Press the 'Phone' button to begin.
• After the Ready prompt, say Setup .
• When prompted, say " Phone Pairing".
• At the next prompt, say Delete .
3