Reinstalling The Scissors-Type Jack And Tools (Srt-10 Models) - Dodge 2004 DR Ram SRT-10 Owner's Manual

Reinstalling The Scissors-Type Jack And Tools
(SRT–10 Models)
1. Lower the jack all the way down by turning the jack
turn-screw until the jack is snug.
2. Position the jack and tool bag (unrolled). Make sure
the lug wrench is under the jack near the jack turn-screw.
Turn Screw and Lug
WHAT TO DO IN EMERGENCIES 199
3. Fold the flap and roll the jack tool kit into a cylindrical
package (in direction of arrows), and tie to the jack using
the tie straps.
Folding Flap and Rolling Bag
6