Resetting A Local User Password On Multiple Computers - Symantec ALTIRIS REAL-TIME SYSTEM MANAGER 7.0 SP2 - V1.0 Manual

Resetting a local user password on multiple computers

To apply the network filtering settings
1 In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2 In the left pane, click System Jobs and Tasks > Real-Time System Manager.
3
Click Network Filtering.
4 If you want to block network traffic to and from the operating system, do the
following steps:
Click Filter network traffic other than to and from the Notification
Server.
Choose if you want to use the solution default filtering settings or browse
for a custom .xml file.
See "Network Filters page"
If you want to prevent the target computer from sending malicious packets,
check Enable anti-spoofing filter. This feature forces the identity
verification of outgoing network traffic and drops packets if the computer
is suspected of originating malicious attacks that are known as IP spoofing.
5 If you want to protect the target computer from network flooding, click Limit
the number of PING packets to and type the number of packets per second
allowed to pass through the Intel AMT network filter.
Default: 10 packets per second.
6 If you want to disable network filtering, click Allow all network traffic.
7 Click Save changes.
8
Run the task one time or on a schedule.
For information on how to run tasks, see the Symantec Management Platform
Help.
You can reset the password for a local user on the target computers.
You can also perform this task on a single computer in real time.
See "Running real-time one-to-one tasks"
To reset a password
1 In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2 In the left pane, click System Jobs and Tasks > Real-Time System Manager.
Using Real-Time System Manager
Running real-time one-to-many tasks
on page 59.
on page 31.
43