Symantec ALTIRIS REAL-TIME SYSTEM MANAGER 7.0 SP2 - V1.0 Manual page 36

36 Using Real-Time System Manager
Running real-time one-to-one tasks
To use this feature with the Intel AMT client computers that are configured in
secure mode, their Fully Qualified Domain Name (FQDN) must be resolved correctly
on the Notification Server computer. Also, you must configure the connection
profile to use the right certificates for authentication.
For more information, see the Out of Band Management Component Implementation
Guide.
If the IDE-R session cannot start, make sure that the Intel AMT device is configured
to allow this functionality.
See "Configuring the Intel AMT device settings "
You can also run this task on multiple computers, immediately or on a schedule.
See "Booting multiple computers from another device "
To start an IDE-R session
1
Open the Real-Time view for the computer you want to manage.
See "Accessing the Real-Time view"
2 Click Real-Time System Manager > Management Operations > Manage
Power State and Redirection.
3 Check Perform boot from.
Warning: If there is already an active IDE-R session, it is terminated when the
task runs.
4
Select the device to boot from.
5 To start the computer from an image, click Browse to navigate to a network
share where the image is located.
Warning: Do not use an image file that is placed on a CD or a DVD-ROM to
start the computer. Use only the images that are stored on local or network
hard disk drives.
6 Turn on or restart the computer.
See "Turning off, turning on, or restarting a computer"
on page 40.
on page 41.
on page 32.
on page 33.