Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 86

86 Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management
Assigning a profile to a single computer manually
By assigning a profile to an Intel AMT resource that is known to Intel SCS, but is
in an unconfigured state, you initiate the setup and configuration process.
You can also assign a new profile to a device, that is already configured with
another profile. After doing so, click the Re-configure symbol.
If you do not see the Intel AMT capable computer that you want to set up and
configure in the list, make sure that the Intel AMT device has been properly
initialized in the last 6 hours. Make sure that the Intel AMT capable computer is
turned on and is connected to the network.
See "About Intel AMT initialization"
See "About resending Hello messages"
See "About assigning a configuration profile"
To assign a profile to a single computer manually
1 Open the Intel AMT Systems page.
See "Understanding the Intel SCS interface"
2 In the grid, click a computer.
3 Click the Assign profile symbol.
4 In the Edit mapping dialog box, type the FQDN of the computer.
This FQDN will be assigned to the Intel AMT device during setup and
configuration.
5 If you enabled Active Directory integration, select the organizational unit
where you want to register AMT objects.
Example: IntelAMT
See "Integrating Intel SCS with Active Directory"
6 From the Profile drop-down list, select a configuration profile.
See "Creating Intel AMT configuration profiles"
7
If you want Intel SCS to automatically reconfigure the selected Intel AMT
device when the settings in the configuration profile change, check
Re-configure if settings change.
8
Click OK.
Assigning a profile to multiple computers manually
Batch profile assignment is possible for the Intel AMT capable computers, whose
FQDN is known to Out of Band Management Component. To let the solution detect
the FQDN, you must install the Altiris Agent on the target computers.
on page 58.
on page 89.
on page 85.
on page 84.
on page 55.
on page 62.