Appendix B Reference Topics; About Passwords Used With Intel Amt - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

Reference topics
This appendix includes the following topics:

About passwords used with Intel AMT

To reduce vulnerability of passwords to a dictionary attack, only strong passwords
are accepted by Intel AMT devices.
The strong password must meet the following criteria:
Example: P@ssw0rd
Also, you are required to use strong passwords in the Symantec Management
Console when you configure Out of Band Management Component.
About passwords used with Intel AMT
About populating filters
How Resource Synchronization policy works
Remote Configuration certificate requirements
Remote Configuration certificate – differences between releases
Be at least eight characters long. Characters allowed are 7-bit ASCII characters
in the values of 32-126 inclusive. The characters " ' , and : are not allowed.
Have at least one digit (Example: 0, 1, 2, ... 9).
Have at least one 7-bit ASCII non-alphanumeric character (Example: !, @, $).
Contain both upper and lower case Latin characters (Example: A, a, B, b).
Appendix
B