156
About Out of Band Management Component pages
Get ASF/DASH Configuration Inventory task
Get ASF/DASH Configuration Inventory task
Update ASF Configuration Settings task
Options in the Assign profile dialog box
Table 10-24
Option
Description
Domain
Type the domain for which you want to create the mapping.
You can also type a domain suffix. In this case, the Resource Synchronization
policy assigns the profile you specify here to the computers from subdomains.
For example, if you type mydomain.com, the computers from
subdomain.mydomain.com also get the profile you specify here.
AD OU
If you enabled Active Directory integration, select the organizational unit where
you want to register the AMT objects.
See
"Integrating Intel SCS with Active Directory"
Example: IntelAMT
Profile
Select the configuration profile you want to assign automatically to all new Intel
AMT devices from the domain you specified here.
This task lets you get the ASF or DASH settings (inventory) from client computers.
The ASF/DASH inventory is collected and sent to Notification Server in the
standard Notification Server Inventory format.
Note: The Out of Band Task Agent must be installed on the client computers
before you run the task. The client computer must be turned on to run this task.
The operating system must be running.
See
"Preparing target computers for management"
To get ASF or DASH inventory, run this task one time or on a schedule.
For information on running tasks, see the Symantec Management Platform Help.
This task lets you enable ASF and configure ASF settings remotely on client
computers.
on page 55.
on page 49.